Weighing Scale Indicator MI-830
-3pcs Control Relay built in
-1/8 Din Size(96X48 mm), Simulating Calibration, DC 12~24V
Port: Incheon air port or Busan port
Minimum Order Quantity: 20 Piece/Pieces
Supply Ability: 500 Piece/Pieces per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: - Each item will be packed in its own box.- Packed items will be consoled in master carton Box.- If needed, wooden packing will be supplied.
Delivery Detail: Within 3weeks, after receipt Final Order Confirmation
Weighing Scale Indicator MI-830
- Specification
Input Sensitivity | 0.2μV / Digit |
Load Cell Excitation | DC 10V ( - 5V ~ + 5V ) |
Max. Signal Input Voltage | Max.32mV |
Temperature Coefficient | [Zero] ±10PPM/°C / [Span] ±10PPM/°C |
Input Noise | ±0.6 μV P.P |
Input Impedance | Over 10ΜΩ |
A/D Conversion Method | Sigma-Delta |
A/D Resolution(Internal) | 520,000 Count(19bit) |
A/D Sampling Rate | Max. 200times / Sec |
Non-Linearity | 0.01% FS |
Display Resolution(External) | 1/30,000 |
- Display Part
Display | Parts | Specification |
Display | Main Display | 7Segments, 5 Digit RED FND Display |
Size :12.7mm(H)×7.3mm(W) | ||
Min. Division | ×1, ×2, ×5, ×10, ×20, ×50 | |
Max. display value | 99950 | |
Under Zero value | "-" (Minus display) | |
Status lamp | STEADY, ZERO, LOW, HI, END, HOLD, RTxD | Green LED Display(3Ø) |
K e y | Function keys | Zero / F / Set / Enter (4pcs function keys) |
- Option
Option No.1 | RS-422 |
Option No.2 | RS-232 (Standard Installation) |
Option No.5 | 4~20mA (Analogue Output) |
Option No.6 | 0~10V (Analogue Output) |
-General Specification
Power Supply | DC 12~24V / About 200~300mA |
Operating Temperature Range | -5°C ~ 40°C |
Operating Humidity Range | Under 85% Rh (non-condensing) |
External Dimension | 100(W) X 52(H) X 125(L) mm |
Net Weight(kg) | About 450g |
Gross Weight(kg) | About 600g |
-Application & Cutting Size
Application | MI 800 Series Dimension and Panel Cutting Size |
-Relay Mode