water vapor permeation tester(analyzer) is a testing equipment used to test water transmission rate of plastic film and others
Port: Guangzhou
Minimum Order Quantity: 1 Set/Sets any other
Supply Ability: 5 Set/Sets per Quarter
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: By wooden case
Delivery Detail: 10-15days after receipt of payment
Functions and Features :
1) It has two test chambers with two sensors, and is a self standing instrument and
it gives simultaneous test reports;
2)It measures trace water vapor transmission rates in packaging barrier films;
3)Testing result is high precision;
4) With LCD screen display;
5) It adopt TCP/IP interface, so it is easy to inspect the running state,
all testing controlled by computer automatically, the result can be showed
by curve accurately and the testing report can be printed out;
6) The dual-testing mode (increasing and decreasing weight methods) is initially adopted;
7) Testing curve could spontaneously show the permeation, temperature, humidity
and the weight of water permeating cup;
8) It can finish auto-judging, auto-outage, and auto-storage of the datas;
9) Technical standard ISO2528:1995; GB/T1037-1988; GB/T16928-1997 ; YBB00092003;
ASTM F1770, ASTM D1653-03 ; ASTM E96-00e1; ASTM E-398; TAPPI T464.
Technical Specifications
1. Measuring range 0.02~10000g/m3*24h
SENSOR: 0.0001g (best European brand, tested recommended by NASA)
Test Chambers: Two (each chamber has a separate sensor)
2. Testing precision : 0.001g/m2*24h
3. Testing temperature:10°C~50°C
4. Temperature control precision:±0.1°C
5. Humidity Range:0%~30%RH (Best recommended as per International standards), (also available as per Chinese standard (5%- 90% RH)
6. Humidity precision: ±2%RH
7..Calibrated film supply: High barrier and Low barrier- 2 each (PET 12 and Multilayer 100u)
Dimension: 20cm*20cm*2cm.
8.Silica gel required : 250g / Chamber
9. Transmission area: 50.24cm2
10.Power Supply: 220V,50HZ
11. Weight: 60KG
12.Dimension: 955 (L)mm*745(W) mm.*660(H) mm.