1.Water quality tester
2.Competitive price
3.Fast delivery
Port: Shanghai,China
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 7000 Piece/Pieces per Month
Payment Terms: T/T
Contact Supplier
Water quality tester
TDS-03 TDS meter
SPECIFICATIONS
Range: 0~9990ppm (mg/L)
Accuracy: ±2%F.S
Calibration: Factory Calibrated
Temperature Compensation: Automatic
Operating Temperature: 0~50°C
Power source: 2×1.5v(button cell)
size: 142X 25X15mm
weight: 36g
OPERATING INSTRUCTIONS
1.remove the protective cap.
2.press the ON/OFF button once out of the water. The tester will read “000”
3. Immerse the tester into the water no more than 2 inches.
4.wait for the display to stabilize. The tester automatically compensates for
temperatures variations. Once the readout stabilizes(10-30seconds), press
the HOLD button to view out of the water.
5.press the ON/OFF button again to turn off the tester. The tester will shut off
automatically after 10 minutes of non-use.
6.after usage, shake off the water from your tester or wipe it with a tissue.
Note: If the tester displays a flashing”X10”icon, multiply the reading by 10.
Important: do not drop the entire tester in the water or dip beyond the
maximum 2” level. This product is not waterproof. Tester is not meant to used
in hot water.
Calibration: your meter has been factory calibrated to324ppm,which is
suitable for most applications. Re-calibration may be necessary from time-to
time, depending on usage.
Pls contact us