Walk-in Temperature Humidity Test Chamber
1.LCD touch screen.
2.Inner material: SUS#304
3.Tecumseh Compressor
Port: shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Month 8 H/D
Payment Terms: L/C,T/T,Western Union,Cash
Contact SupplierPackaging Detail: wooden case
Delivery Detail: 15 days after payment normally, special for the request
Walk-in constant temperature and humidity testing machine is consist of Control Panel, electrical panels, moisturizing plate blower, heater, humidifier, freezer. It provides a large spare to test the temperature and humidity for large-scale parts, semi-finished products, it applied to test products that large-scale or the quantity more, such as: computer terminals, vehicle parts.
corresponding standard :
1. GB11158 Technical conditions for high-temperature testing room
2. GB10589-89 Technical conditions for low-temperature testing room
3. GB/T10586-89 technical conditions for humidity testing room
4. GB/T2423.1-2001 testing methods for low-temperature
5. GB/T2423.2-2001 testing methods for high-temperature
6. GB/T2423.3-93 technical conditions for humidity testing room
7. GB/T2423.4-93 testing method for alternating hot and humid
8. IEC60068-2-1.1990 testing methods for low-temperature
9. IEC60068-2-2.1974 testing methods for high-temperature
10. GJB150.3 High-temperature test
11. GJB150.4 Low-temperature test
12. GJB150.9 muggy test
13. GB/T2423.22 temperature test
Applicable Industry:
Used in defense industry, aerospace industry, automation components, automotive parts, electrical and electronic parts, plastics, chemical, pharmaceutical industries and related products
Technical parameters:
1.High intelligent: according to the test conditions and requirements, automatic control to set, with minimum ability to maintain the value.
2.High reliability : main part by all the various famous professional provided.
3.Save consumption: unique energy saving technology design, greatly reduce the equipment running costs.
4.Special design: according to customer's demands , satisfying the customer special requirement.
5.Control interface: unique development of color LCD touch operating system.
Technical parameters
1.Temperature range; - 40 °C -- 150 °C, Humidity range : 20%-98%
2.Temperature fluctuations degrees: ± 0.5 °C
3.Temperature deviation: ± 2 °C
4.Tempering (wetness adjusting) method: mandatory drum wind circulation and balance tempering and wetness adjusting method
5.Environmental temperature: + 5 ~ + 38 °C
6.Heater: nickel chrome alloy electric heater
7.Fan: centrifugal fan
8.Refrigeration way: machine compression single stage/cascade refrigeration
9.Cooling way: air or water cooling
10.Content: 4m*4m*3m or request
11.Operation mode: setting value/programs running
12.Program volume: 120 program group, each group of 100 section, 100 cycle steps (may be based on customer demand expansion) single point 1 program
13.Control mode: PID control Safety device: Leakage assurance, short-circuit guarantee, compressor overpressure guarantee, compressor overheating assurance, fan overheating guarantee and over temperature guarantee
Korea 5.7 inch color touch screen (TEMI880)