Wafer electromagnetic flow meter - wafer electromagnetic flowmeter

Wafer electromagnetic flow meter

Installation modes: Wafer integrated type

Language selection: Chinese and English

Aperture: DN40~DN200

Electrode material: 316, Hb, Hc, Ti, Ta

Inside lining material: PFA, F46

Medium: conducting liquid (include solid liquid two-phase body)

Accuracy grade: 0.2%, 0.5%, 1.0% (DN10~DN200)

Medium conductivity:>5μS/cm (water > 20μs/cm)

Excitation mode: LF square wave excitation, HF square wave excitation (apply to serosity measurement)

Flow velocity scope: 0.1~15m/s (flow unit selectable)

Connection flange: GB/T9119-2000

Medium temperature: -10~+60°C,

Rated pressure: 1.0Mpa~4.0Mpa (divided according to aperture, refer to type spectrum table

Protection grade: IP67

Output signal: 4~20mA output, frequency/pulse, alarm

Hollow tube measurement: measuring hollow tube function without electrodes, continuous measurements, fix value alarm

Record function: record of power-fail time, automatic record of power break time of instrument system, make up flow left out (for option)

Infrared remote control: infrared hand-hold operational keyboard (for option)

Application: Acid, alkali, water supply and drainage, food, paper pulp, ore pulp etc.

Display: Flow rate, flow, percentage, integrating flow, fault alarm etc.

Supply power: 220V AC, 24V DC

Mark of explosion proof: Exd ΙΙ CT6 (for option)