PLATINUM ELECTRODE:
ECscan series testers use a standard platinum sensor
for a fast and reliable measurement. Replaceable sens
Port: Shanghai
Minimum Order Quantity: 10 Set/Sets
Supply Ability: 500 Set/Sets per Week
Payment Terms: L/C,T/T,Western Union
Contact Supplier
ECSCAN SERIES
WATERPROOF POCKET CONDUCTIVITY/oC TESTER
ECscan series conductivity tester include the models 20, 30,
40 for the measurement of conductivity and temperature of liquids. The built-in automatic temperature compensation
feature ensures accurate measuring value.
APPLICATIONS:
ECscan20 for measuring low conductivity fluids.
ECscan30 for measuring general conductivity fluids.
ECscan40 for measuring high conductivity fluids.
PLATINUM ELECTRODE:
ECscan series testers use a standard platinum sensor
for a fast and reliable measurement. Replaceable sensor
design facilitates maintenance.
SINGLE POINT CALIBRATION:
The tester allows single point calibration. The user
chooses the standard conductivity solution, sets the
conductivity value on the tester, immerses the electrode
into calibration solution and presses the CAL key and the
tester is automatically calibrated.
AUTOMATIC TEMPERATURE COMPENSATION:
ECscan series has a temperature sensor, Press the °C
key, The testers shows the current temperature.
Automatic Temperature Compensation provide accurate
measurements over the entire conductivity ranges.
HOLD FUNCTION:
During the measurement, hold function can momentarily
freeze the reading on the display for easy viewing and
recording.
AUTO-POWER OFF:
These testers will automatically power down 8 minutes
after the last key press. This function is helpful to save
battery. It can also be turned off manually.
WATERPROOF FEATURE:
O-ring seals on the screw-tight battery and sensor
compartments prevent water damage even if fully
immersed. The unit also floats.
METERS INCLUDED: Button Cell Batteries
SPECIFICATIONS:
Model | ECscan20 | ECscan30 | ECscan40 | ||
Conductivity Range | 0.0~199.9uS/cm | 0~1999uS/cm | 0.00~19.99mS/cm | ||
Resolution | 0.1uS/cm | 1uS/cm | 0.01mS/cm | ||
Conductivity Accuracy | ±1% F.S | ±1% F.S | ±1% F.S | ||
Temperature Range | 0~80oC | ||||
Temperature Accuracy | ±1oC | ||||
Calibration Points | 1 point | ||||
Calibration Solutions | 100.0~170.0uS/cm | 1000~1700uS/cm | 10.00~17.00mS/cm | ||
Temperature Compensation | 0~50oC, Automatic | ||||
Temperature Coefficient | 2% peroC | ||||
Normalization Temperature | 25oC, fixed | ||||
Auto-Off | 8 minutes after last key pressed | ||||
Operating Temperature | 0~60oC | ||||
Power Requirements | 3×1.5V Alkaline button cell batteries | ||||
Battery Life | Approx. 150 hours | ||||
Dimensions | 180(L)×30(Dia.)mm | ||||
Weight | 85g |