Vulcanizing press machine
1.all kinds of rubber molding products
2.simple structure
3.safe device
4.3 years warranty
Port: Yantian
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 500 Set/Sets per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union
Contact SupplierPackaging Detail: in wooden case
Delivery Detail: within 30 working days after get 30% downpayment
Vulcanizing press machine
Machine summary
HZ-7014 Vulcanizing press machine This series of vulcanizing press for use in pressing all kinds of rubber molding products and non-model products, major equipment, can also be used to suppress various types of thermosetting plastics and foam rubber products. Independent institutions and the electrical power system that uses centralized control buttons. Working pressure, heating temperature can be adjusted within a certain range. There are manual and semi-automatic models .
Main features:
This machine is a four-post structure under the roof, the host from the upper beam and lower base, moving platform, the cylinder group and the column and so on. Plunger cylinder group structure installation within the next base..
1, While working, plunger movement from the bottom up mold, pressing, and automatic heat, pressure and exhaust functions, to ensure product quality. The machine is equipped with hydraulic power source for use in stand-alone drive.
2, When product vulcanizing, the pump motor to stop working, and has automatic pressure compensation function and the pump shutdown time delay, circuit configuration is more reasonable and reliable.
3, Gas discharge time, put the number of gas, heating temperature and curing time can be set, easy to operate.
4, The machine is stand-alone structure of a single pumping station, pumps located in the host on the right, under the base to double as the fuel tank; hydraulic and electrical systems, they are overload protection, safety and reliability.
5, Hydraulic application of the German imported technology, reliable sealing and long life.
6, The machine fastening electrical boxes to the left of the host, with the buttons, the respective curing time control, temperature control and electric hydraulic compensation function.
7, The user can be allocated according to their characteristics and selection of models.
Applicable industry:
Suitable for rubber, tire, recycled rubber manufacturers
Technical parameter:
Model | Item | Unit | Parameter | |
50T | 63T | |||
1 | Nominal clamping force | KN | 500 | 630 |
2 | Hot plate specifications | mm | 400×400 | 500×500 |
3 | Working layer | layer | 2 | 2 |
4 | Maximum fluid pressure | Mpa | 16 | 20 |
5 | Plunger diameter | mm | 200 | 200 |
6 | Plunger stroke | mm | 250 | 250 |
7 | Heating | Electric heating, steam heating, oil heating | ||
8 | Motor Power | KW | 2.6 | 2.6 |
9 | Dimensions | Length mm | 477 | 577 |
Width mm | 1163 | 1283 | ||
Height mm | 1657 | 1698 |