White Light Automatic 3D solder paste inspection (SPI) and measurement system. High precision and fast 3D measurement.
Port: Minneapolis/Portland, USA
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 10 Unit/Units per Month
Payment Terms: L/C,T/T
Contact Supplier
Easy to Use
The A500 is probably the easiest to use fully automatic SPI system. The user simply loads a Gerber 274-X file for the PCB panel to be inspected, locks down the panel on the board holder and hits the play button. The system takes over from there, automatically finding fiducials, identifying pads and filing away height and volume data for each pad. Color coded pads on the Gerber data show pads outside the thresholds in real-time.
Plug and Play
Completely plug-and-play with any Windows™ 7 desktop or laptop that has a Gigabit Ethernet port.
Long Life
The A500 is low maintenance and is designed to give years of trouble-free usage. The sensor and mounting components are machined from aircraft grade aluminum. To ensure consistent high quality, over 95% of sensor and power supply components are sourced in the U.S. and the motion system is sourced from Japan.
Technology
State-of-the-art xy motion allows totally automatic and seamless scanning of PCB panels up to 300mm X 300mm in size. The z-axis motion allows for auto-focus of the sensor and board warp compensation.
Like all other VisionMaster equipment, the A500 uses advanced white light Moiré interferometry to build height data for every pixel in the view. Long life, solid state LEDs are used for projection and background lighting. Advanced CMOS image sensors are immune to electrical analog noise resulting in very repeatable measurements. Gigabit connectivity means fast, reliable and easy connection to the PC.
Field of View | 8mm x 6mm |
Image Sensor | 5 megapixel monochrome CMOS 12 bit |
Resolution, z height | 0.25μm |
Resolution, xy | 3μm |
Height Range | 25μm to 400μm |
Measurement Time | <0.4 seconds |
Repeatability | Calibration Surface: <1% (+/-20% tolerance, 50μm minimum) Typical Solder Brick: <<10% (+/-20% tolerance, 50μm minimum) |
Maximum PCB Panel Size | 300mm x 300mm |
Motion xyz Resolution | 10μm. Optical encoders on all axes. |
Motion xyz Speed | 100mm/sec maximum |
Power | 40W nominal, 100W maximum, <2W standby, 90V-240V 50/60 Hz |
Connectivity | Gigabit Ethernet 1000Base-T Cat 5e/6, RJ-45 |
Operating Conditions | Temperature 10° to 35°C, humidity <90% non-condensing |
Weight | Net 16 kg, gross 20 kg. |
Warranty | 2 years for sensor and electronics, 1 year for xyz motion system. |
http://www.visionmasterinc.com/VMI/index.php/a500