V cone flowmeter (Cone flow meter, V taper flow meter)Pressure difference flow meter, pressure difference flowmeter,flowmeter.
Port: Shanghai port
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 500 Piece/Pieces per Month
Payment Terms: T/T,Western Union
Contact Supplier
V cone flowmeter (Cone flow meter, V taper flow meter)
Technical parameters of XVC V-cone flowmeter
1Low requirements on installation: straight tube 0-3D in the front and straight tube 0-1D in the rear
2Ratio of range: 10:1 (usually); the maximal proper parameter: 50:1.
3Small damage due to the pressing: the damage is 1/31/5 that of the pore plate when the value of β remains the same
4Strong resistance against wear: After the streamline V cone is throttled, the vacuum effect will be generated on the surface of V cone to keep the V cone from being worn easily.
5Being free from blockage and adhesion: the complete purging design of V cone avoids the settlement of residue, coagulation or particle.
6Long-standing favorable stability: the value of β can remain the same for long and the accurateness in measurement can be ensured for a long period
7High precision: 0.5 grade
8Good repeatability: more than 0.1%
9Stable signal: singular fluctuation is 1/10 of that of pore plate
10Wide range of the value of β: the unique geometrical shape of V cone flow sensor allows wide range of the value of β...
11Wide range of caliber: DN25DN2000;
12The ability to measure high temperature and high-pressure medium: maximal working temperature: 850; maximal pressure: 40MPa
13The ability to measure the dirty medium (coke-oven gas, blast furnace gas, feed stock and residual oil)
14The ability to measure gas and liquid two-phase medium (moisture and condensed water).....