1)simple operation,easy to install
2)high accuracy:+/-1%
3)small size, easy to carry
4)battery-powered
5)RS232 output.
Port: Shanghai
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 500 Set/Sets per Month
Payment Terms: T/T,Western Union
Contact Supplier
Packaging Detail: Aluminium alloy case
Delivery Detail: 3~15days upon the receipt of payment
Ultrasonic flow meter(liquidflowmeter,flow meter)
Functions and characteristics:
1) Non-wetted surface meter is used in measure uneasy touch and observe flow And big pipe
2) Don't change the flow state and bring additive resistance, the meter installation and examine and repair would not impact production. The meter is a perfect save resource type flowmeter
3) The price is low.
4) The measured hardly impact the veracity medium.
Features:
1) Accuracy: +/-2%Fs (full range)
2) Output of direct current signal: 4 - 20mA, impedance not more than 600 ohm
3) Medium temperature: -20 ~ +150
4) Pulse output accumulative flow: Light isolation, collector, emitter open circuit passive output, pulse width 2ms
5) Serial communication: RS485 or RS232 (opt)
6) State of fluid: Full-pipe: Axis symmetry ..
7) Power: 220V+/-10% AC 50Hz
8) Printer: (Opt. ) TpP-16 mini-printer.
9) Environment temperature: -10 ~ +45
10) Environment humidity: Relative humidity not more than 85%
11) Weight: Stationary type 9kg, portable type 5kg ..
12) Velocity of flow :0.1 - 12 m/s..
| Data | S1Z | M1Z | S1 | M1 | L1 | S1H | M1H |
| Pipe size | 15-100 | 50-700 | 15-100 | 50-700 | 300-6000 | 15-100 | 50-700 |
| Material | Aluminum Alloy | ABS | Special material for hi-temp | ||||
| Frequency | 1MHz | ||||||
| Installation | V(N,W)flange | V,Zflange | V(N,W)flange | V,Zflange | Zflange | V(N,W)Flange | V,Z flange |
| Calibration | Calibrated together with flowmeter | ||||||
| Magnetic | yes | no | |||||
| Temperature | 0°C-70°C | 0°C-160°C | |||||
| IP | IP65 | ||||||
| Outsize | 200×25×25 | 280×40×40 | 45×30×30 | 60×45×45 | 80×70×55 | 90×85×24 | 90×82×29 |
| WT(g/pair) | 250 | 1080 | 75 | 250 | 650 | 94 | 150 |
| Medium | Water,sea water,sewage,Alcohol,oil etc | ||||||
| Turbidity | ≤10000ppm with little air bubble | ||||||
| Pipe | Carbon steel stainless steel,cast iron,Brass,PVC,Aluminum etc. | ||||||
| Pipe inner | Rubber,Slurry,PP,PS,bakelite, PTFE | ||||||
| Signal cable | standard:5M×2,optinal:10M×2 or 15M×2... | ||||||
Model No.: LZ-D
Features: 1.direct display,low price
2. Air flow meter, liquid flow meter
3. Medium temperature: 0-120
Model No.: LZ- X
Features: Multivariable vortex flowmeter for measuring volumetric flow, temperature, pressure, density, and mass flow using a single meter
Model No.: LZ-W(Y)-N/A
Features: Turbine Flow sensor based upon torque equilibrium principle, is a kind of flow rate meters.
good to measure liquid
Model No.: LZ-C
Features: metal rotary flow meters are a type of low weight, low price, low maintainess. easy to install and mainly used to measure liquid
Model No.: DMHF
Features: 1.Heat flow function,
2.Battery(rechargeable),Over 48 hours working time
3.Low flow rate
4.HVAC
5.High acuuracy&stability
Model No.: DMTFP
Features: 1.CE Certificate
2.Over 48 hours working-time battery
3.Easily transportable
4.Data logger
5.High temp:250centigrade
Model No.: DMTFB
Features: 1.Easy installation of clamp-on
2.Up to 8GB SD card data logger optional
3.High temp.:250 degree
4.Heat flow function
Model No.: LWCQ/B
Features: The insertion type turbine flow meters are widely used in measuring large pipe size liquid flow.
Model No.: BF70-2
Features: Ultrasonic flowmeter, no pressure lose. Easy installation and maintance. Your best Choice for flow measuring.
Model No.: BF40-A1-1
Features: sanitary magnetic, for food industry. High accuracy, easy installation. No moving part.
Model No.: DMDFC
Features: 1.Widely used in dirty liquids
2.Especially suitable for large pipe sewage flow
3.High accuracy flow meter
Model No.: BF70-1
Features: Transmit time ultrasonic flowmeters are excellent in measuring all kind of media. No pressure lose.