Uhp electric hydraulic test pump(400MPA) ,hydraulic pressure tester1.simple structure
2.the use of safe
3.double c
Port: any ports if possible
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 20 Set/Sets per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: wooden box
Delivery Detail: 10 days after get the T/T payment advance
Uhp electric hydraulic test pump(400MPA) ,hydraulic pressure tester
I .Purpose
CB series super-pressure pump is applied in hydraulic test and bursting test of containers and vessels, pipelines and valves. In test, the pressure is boosted from normal pressure to rated pressure. The medium used in pressure test is emulsion, or antirust water and neutral oil similar to emulsion in viscosity. And the test temperature is 5-60 °C. The performance and quality of CB series super-pressure pump comply with the requirements of JB/T6909-93 Super-Pressure Pump.
II .Technical parameters
| Type | MPa Rated pressure (MPa) | L/h Theoretical flow (L/h) | Mm Diameter of plunger (Mm) | Mm Stroke (Mm) | min-1 Reciprocating number(min-1) | Type and power of motor | Dimension (length*width*height (mm) | Kg Weight (kg) |
| CB200-15 | 200 | 230 | 16 | 60 | 108 | Y180L-6 15KW | 1800X1050X 880 | 1000 |
| CB250-15 | 250 | 180 | 14 | |||||
| CB300-15 | 300 | 140 | 14 | 88 | ||||
| CB400-15 | 400 | 105 | 12 |
III. Main structure and operating principle
This pump is a horizontally-placed three-plunger type, composed of an electric motor, belt pulleys, a power end, a fluid end, a pneumatic high-pressure unloader valve and a base. Its dimension and size of installation holes are as shown in Figure 1.
1. Power end:
It mainly consists of a SCB.4 power end (see Figure 2, including a stand, a crankshaft, connecting rods, crosshead and gear pair) and belt pulleys. The rotational motion of the electric motor involves primary reduction through the belt pulleys and secondary reduction through two pairs of helical gear, and then the rotational motion turns into linear reciprocating motion of the crosshead with the aid of the crank link mechanism, to drive the plunger to move. The rotating big gear wheel propels the machine oil within the machine body to flow to lubricate the crankshaft bearing, crosshead and other parts via the oil slots in the connecting rod.
Model No.: ST-1600MG
Features: 1600.C Laboratory Vacuum tube Heating Furnace
1.Chamber size:Dia200x400mm(6.0"x16"
2.MoSi2 heating element
3.Vacuum:0.1Pa
Model No.: ST-1200VTF
Features: 1200 C Laboratory Vertical Tube Furnace
1.tube size:Dia60/80mm,Height:300/400mm
2.Heating element:Fe-Cr-Al wire
Model No.: ST-1600MG
Features: 1600 Centigrade Vacuum Laboratory Tube Furnace
1.Chamber size:Dia60x300mm
2.MoSi2 heating elements
3.Vacuum:0.1Pa
Model No.: ST-1200RG
Features: 1200.C Big Capacity Vacuum Tube Furnace
1.Chamber size:Dia200xL400 mm
2.Heating element:Fe-Cr-Al wire
3.Vacuum:0.1Pa
Model No.: ST-1200RG
Features: 1200C Laboratory Vacuum Tube Furnace
1.Tube size:Dia80x300mm(Dia3.2x12")
2.Heating element:Fe-Cr-Al wire
3.Vacuum:0.1Pa
Model No.: ST-1200RG
Features: 1200C Split type Experimental Vacuum Tube Furnace
1.Chamber size:Dia50xL300mm
2.Heating element:Fe-Cr-Al wire
3.Vacuum:0.1Pa
Model No.: ST-1200RTF
Features: 1200C Lab Rotary Tube Furnace
1.Tube size:Dia60xL400mm
2.tilt angle:0-30deg
3.rotate Speed:0-7RPM
4.Heat element:Fe-Cr-Al
Model No.: ST-1600MG
Features: 1600.C High Vacuum Tube Furnace
1.Chamber size:Dia50xL300 mm
2.MoSi2 heating elements
3.Vacuum:0.1Pa
Model No.: ST-1200VTF
Features: 1200.C Vertical Atmosphere Tube Furnace
1.Chamber size:Dia60xH300mm
2.Max. Vacuum:0.1Pa
3.Heating element:Fe-Cr-Al wire
Model No.: ST-1200VTF
Features: 1200.C Vacuum Vertical Tube Furnace
1.Tube size:Dia60xH400 mm
2.Max. Vacuum:0.1Pa
3.Heating element:Fe-Cr-Al wire
Model No.: ST-1200RG
Features: 1200.C Split type Laboratory Tube Furnace
1.Chamber size:Dia50x400mm
2.Heating element:Fe-Cr-Al wire
3.Vacuum:0.1Pa
Model No.: KJ-1700X
Features: 1. KJ-1700X Chamber furnace,
2. Heated by MoSi2 rod,
3. Max. temp., 1700C; Working temp., 1600C.