float level gauge or be used with magnetic level gauge as a level transmitter
superior technical performance
High quality
Port: xi an, tianjin, shanghai and beijing
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 100 Set/Sets per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact Supplier
Packaging Detail: neutral wooden boxes; neutral cartons/package: size and the product weight will be determine by the buyer's different design requirement. If we get the detail data of your require product, we will tell you size and the product weight as soon as possible!/ standard factory packages
Delivery Detail: within 1-2 weeks after received payment
Application:
water heater, water dispenser, air-condition, air-cooler, BSD-P, humidifier, dehumidifier, fluid control, a pump, an indicator, an alarm, or other device.
Function Principle:
The resistance chain with the reed contacts are built in a pipe made of Stainless Steel. According to the movement of the float, the float magnet closes one reed contact which produces a resistance proportional to the height of the liquid in the tank. You get a near-analogous output signal, with a resolution of about 10 mm, 20mm, or 5mm.Then the reed chain with an R/I measurement transducer can be changed without interrupting the operation. To change the level to 4~20mA proportional.The resistance chain receives it’s power supply from the transmitter. The 4...20 mA transmitter output signal transferred to an indicator or can be used to drive alarm contacts.
Advantage:
The UHF-HT Series level transmitter is a digital level transmitter with HART communication. It is designed for ease of calibration and set-up, with superior technical performance.
A handheld communicator and local push-buttons with a LCD digital display offer the operator the potential to calibration. without ever leaving the control room.The UHF-HT series instrument is a 2 wire, loop-powered level transmitter with HART communication.
Technique Data:
Max. medium temperature: 120 °C
For higher temperature(up to 350°C) need Heat protection(only with magnetic level gauge)
Protection pipe: 19 mm×1mm
Resolution: 10mm 20mm 5mm
Material: SS,or 304SS or other matrial
Enclosure: IP65
Out signal: 4~20mA (HART oppotional)
Power supply: 12~36VDC two-lines
Approval: ExdIICT5(oppotional)
It can be used as a float level gauge or be used with magnetic level gauge as a level transmitter, This so-called “Reed-chain” is mounted on the float chamber with tube clamps.
Model No.: UDM-20
Features: water level meter
1.Scale:0~0.5m or 0~4m
2.Pressure:0~600KPa
3.Temperature: 0~80 C
4.ISO9000/9001 certificated
Model No.: HW0203
Features: Output: <30mA or<100mA 3 wires Optional
Power supply : 12~30 V DC
Cable length: cable length standard with 0.25 meters
Model No.: ME1010
Features: Measuring Tape
Item No:ME1010
Model No.: GD-2122B Automatic Karl Fischer T...
Features: GD-2122B Automatic Karl Fischer Titrator/water content tester is suitable to determine water content in the oils
Model No.: UQK-1X
Features: magnetic float level switch
Pressure: <0.6Mpa
Temperature: -20~100 C
Material: 304,316, pp, ptfe
Model No.: FQ
Features: floating ball
1.Size:can be ordered
2.Rated pressure:1.2MPa
3.Operation Temperature: 250
4.Density:>=0.7
Model No.: FQ
Features: float level switch ball
1.Size:can be ordered
2.Rated pressure:1.2MPa
3.Operation Temperature: 250
4.Density:>=0.7
Model No.: FQ
Features: float level switch ball
1.Size:can be ordered
2.Rated pressure:1.2MPa
3.Operation Temperature: 250
4.Density:>=0.7
Model No.: UDM-S2000
Features: horizontal water level sensor
1.Accuracy: 0.5% F.S.
2.Protection: IP66
3.Environmental temperature:-15 ~ +55
Model No.: UHZ
Features: water level meter
1.Scale:0~20Meter
2.Medium density>0.6g/cm3
3.Accuracy:10mm
4.Temperature:-30~520
Model No.: UG
Features: levelling instrument
1.Medium temperature:0~70C
2.Connection:flange,thread
3.Body material: glass or plexiglass
Model No.: UHZ
Features: levelling instrument
1.Scale:0~20Meter
2.Medium density>0.6g/cm3
3.Accuracy:10mm
4.Temperature:-30~520