UDM-R1 Series guide wave (radar level gauge) - UDM-RX

UDM-R1 Series guide wave radar level meter

HL301 Guided Wave Radar Level Meter is an advanced four-wire guided wave radar level meter for measuring liquids, slurries, interface, and solid material level, even as low dielectric constant. Rich probe type and echo-processing software to ensure reliable measurements, with corrosive vapors, foam liquid, saturated steam, high viscosity, agitation, rapid access to materials, warehouse and material level of low dielectric constant and density of the occasions can be applied.

Features

© Reliable performance ---- not subject to effects of changes in density and dielectric constant

© Low dielectric constant measurement --- can accurately measure the dielectric constant as low as 1.4 media

© Extreme environments --- Temperature: -195 °C ~ 427 °C, Pressure: from vacuum to 431 bar Precise measurement accuracy of 2.5 mm

© Measuring length of up to 22.5 m length

© Certification -------- intrinsically safe, explosion-proof certification, certification of non-flammable

© Simple operation ------ 4 keys configuration or through HART ® communication Typical applications

© Power plant: water heaters, low-pressure boilers, scrubbing devices, coal storage, warehouse and other dust

© tanks and oil-water interface, such as drilling mud tank

©intermediate silo, reaction tank, ammonia tank, solid silos, separators, etc.

© warehouse, warehouse materials, blast furnace, alumina bunker, electrolytic cell buffer tank, etc.

© Cement: stone warehouse, raw silo, cement silo, coal storage, slag storage warehouse, etc.;

© Water treatment: reservoir, water tank, water tanks, sedimentation tanks, deep wells, drinking water networks;

© Paper: raw materials warehouse, material storage tower, drum drying, chemical materials storage warehouse, etc.;

© Other: quarry, food, pharmaceutical, environmental protection, shipbuilding and other industries.