Ultrasonic Hardness Tester:on-site measurements such as heat-treat work piece, chromium plating rollers, bearings, moulds area.
Port: qingdao sea port
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 500 Set/Sets per Month
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: carton
Delivery Detail: two weeks
The Portable Ultrasonic Hardness Tester model HY-31 differs completely from traditional hardness testers.it uses a diamond indenter equipped with a vibrating rod that presses on the test surface at a fixed load and then measures its hardness by applying ultrasonic vibrations and analyzing its damping effect.The technique is very reproducible which makes the HY-31 a perfect tool for on-site measurements such as heat-treat work piece, chromium plating rollers, bearings, moulds area.
chromium plating roller bearing crank shaft
Product Features
Specifications
Measuring range | 1. Rockwell hardness HRC 10~70 2. Vickers hardness HV 100~999 |
Digital display units | 1HV, 0.1HRC |
Display of measured values | Digital display (LCD) with EL backlight |
Measuring indenter | Diamond indenter for Micro-Vickers (facing-to-surface angle of 136°) |
Reproducibility | HRC: +/- 1.0HRC(when HRC50-70), HV: +/- (3%rdg) HV, |
Test load and control no. | Approx 1kgf (roughly 10N) |
Data memory | 792 pieces |
MIN.thickness of chromium plating | 8µm |
Weight | Display unit: approx. 700g (including battery), Probe and cable: approx.. 100g |
Dimensions | Display unit: 97(W) x 50(D) x 170(H) mm, Probe diameter: 40mm, length: 164mm |
Allowable operating temperature | -10°C–60°C |
Standard components | 1 display unit, 1 probe , 3 hardness standard test block, 1 carrying case |
Easy To Use
To make a hardness measurement the probe is pressed against the surface to be measured and held in position for only one seconds until a reading is obtained. The result is immediately displayed in the selected hardness scale on the display.