Turbine Flow Meter /flowmeter/flow meter/water flowmeter/oil meter/gas meter

Specifications and Product Details:

Product Feature for Turbine Flow Meter:

(1) High accuracy (regular accuracy±1%R, ±0.5%R, highest accuracy±0.2% R);

(2) Good repeatability (short-term one reaches 0.05%--0.2%), priority to be used in trade settlement for its extremely high accuracy in the regular calibration or on-line calibration.

(3) Pulse frequency signal output is applicable to totality calculation and computer connection with no zero drift and strong anti-interference capacity.

(4) High frequency (3-4kHz) can be achieved, and has high resolution.

(5) Wide rangeability: medium or large diameter may reach 1:20,and small diameters are 1:10.

(6) Compact and light weight structure, convenient installation and maintenance, extensive application ability.

1. Technical Specification for Turbine Flow Meter:

Nominal Diameter(mm) and Connection method	4,6,10,15,20,25,32,40 (tread connection) 15,20,25,32,40 (tread and flange connection) 50,65,80,100,125,150,200 ( flange connection)
Accuracy Class	regular accuracy ±1%R, ±0.5%R, highest accuracy ±0.2% R
Measurement Range Rate	1:10,1:15,1:20
Instrument material	304 stainless steel; 316L stainless steel; etc.
Medium Temperature()	20 120
Ambient Conditions	Temperature1055, Relative Humidity: 590 Atmosphere Pressure:86106Kpa
Signal Output	Sensor: pulse frequency signal, low level≤0.8V high level≥8V. Transmitter: current signal 420mA DC two wires
Supply Power	Sensor: +12V DC, +24V DC (option) Transducer: +24V DC Scene display type meter: 3.2V Lithium cell
Signal Transmission Line	STVPV 3×0.3 (three wires), 2×0.3(two wires)
Transmission Distance	≤1000m
Signal Line Interface	Internal thread M20×1.5
Explode-proof Class	ExdIIBT6
Protection Class	IP65

2. Measurement range and Working pressure:

Nominal Diameter (mm)	Regular Flow rate (m3/h)	Expanding flow rate (m3/h)	Regular tolerance pressure(Mpa)	Special tolerance pressure(Mpa) (flange connection)
DN4	0.040.25	0.040.4	6.3	12, 16, 25
DN6	0.10.6	0.060.6	6.3	12, 16, 25
DN10	0.21.2	0.151.5	6.3	12, 16, 25
DN15	0.66	0.48	6.3, 2.5(flange)	4.0, 6.3, 12, 16, 25
DN20	0.88	0.459	6.3, 2.5(flange)	4.0, 6.3, 12, 16, 25
DN25	110	0.510	6.3, 2.5(flange)	4.0, 6.3, 12, 16, 25
DN32	1.515	0.815	6.3, 2.5(flange)	4.0, 6.3, 12, 16, 25
DN40	220	120	6.3, 2.5(flange)	4.0, 6.3, 12, 16, 25
DN50	440	240	2.5	4.0, 6.3, 12, 16, 25
DN65	770	470	2.5	4.0, 6.3, 12, 16, 25
DN80	10100	5100	2.5	4.0, 6.3, 12, 16, 25
DN100	20200	10200	2.5	4.0, 6.3, 12, 16, 25
DN125	25250	13250	1.6	2.5, 4.0, 6.3, 12, 16
DN150	30300	15300	1.6	2.5, 4.0, 6.3, 12, 16
DN200	80--800	40800	1.6	2.5, 4.0, 6.3, 12, 16