Tubular Level Gauge - HG5-227-80

HG5-227-80/X49W-16P Glass Plate Liquid Level Gauge

PECULIARITY

The Level Gauge suitable for chemical, oil etc Industrial equipment showed that the containers do Level.

STRUCTURE PRINCIPLE

Instruments valve have flange joints, connect with containers pose Unicom,the direct instructions of glass containers through the liquid level, "D-common TYPE" and ‘W-heat preservation TYPE’. preservation TYPE with heating or cooling device. Steam pressure of not more than 0.6 MPa

Heating device do steam, cooling device do water. This will regulate flow properties,jacket G1/4 female conduit connection.

Instruments valve have steel ball. When the glass occurrence of accidents and damage, the steel ball automatism close. To prevent the container medium to large outflows.

In the top of needle-valve instrument limited Cypriot screw tops for gas use, needle-valve on the bottom also installed a limited Cypriot screws, which are available for short, sampling, sewage, cleaning.

MAIN TECHNICAL PARAMETERS

1, Operating pressure: ≤1.0MPa

2, Operating temperature: ≤200°C

3, needle-valve automatism Switching pressure

(needle-valve automatically sealing pressure) : ≥0.2MPa

4, Glass Plate leap difference in temperature:180°C

5, Instruments spec according to install enacted center distance L: 500, 600, 800, 1000, 1100, 1200, 1400, 1700, 2000mm