Time Totalizer - PT-118

Time Totalizer : Latest microcontroller technology with watchdog feature for fail safe operation. - more info check here: http://www.buymeasuringtools.com/Time-Totalizer-10144470/

Quick Brief

Place of Origin: Maharashtra India Brand Name: Ambetronics Model Number: PT-118 Theory: Counter Usage: Industrial Type: Time Totalizer Reset (IP1): Reset by pressing key OR Remote Re... Start (IP2): To start the function i.e. short I... Resolution: 1,0.1,0.01 (programmable) for Sec /... Accuracy: Better than 0.1% Display for Time Totalizer: 6 digits L.E.D disp... Display for RL1 , RL2 ,etc.: 8 digits L.E.D dis... Relay Action: Normally ON-OFF,Pulse output with... Relay Output: 1NO/C/NC potential free contact r... Supply: 230 V AC A10% 50 Hz OR 110 V AC A10% 50...

Specifications and Product Details:

Time Totalizer

FEATURES:-

Latest micro controller technology with watchdog feature for fail safe operation.
Second, Minute, Hour range with 0.01 to 1Resolution programmable by user.
Delay OFF, Delay ON, Pulse output Programmable with pulse duration.
Four digit cycle counter with indication of completed cycle number.
Power on three condition 'Stop/ Reset / Resume' programmable by user.
Reset facility from front side as well as from Rear terminal.
Hold / Resume facility from front side.
Isolated RS - 485 serial port with MODBUS RTU Protocol output for PC interface.

TECHNICAL SPECIFICATIONS:
Reset (IP1)	Manual Reset by pressing RESET key OR Remote Reset from back side terminal i.e. short IP1 with +V Terminal.
Start (IP2)	To start the time totalizer function i.e. short IP2 with +V on rear terminal
Hold	Manually press HOLD key for one second till display flashing "HoLd". To release Hold, press again HOLD key then Ã¢â‚¬ËœrESUnÃ¢â‚¬â„¢ will come on display indicating hold is released.
Range	Second/ Minute/ Hour range from 1-999999 (6 digit) programmable by users. Minute - Second range from 0000.01 to 9999.59. Hour - Minute range from 0000.01 to 9999.59. Hour - Minute- Second range from 00.00.01 to 99.59.59.
Resolution	1,0.1,0.01 (programmable) for Sec / Min / Hour.
Accuracy	Better than 0.1%
Time base	11.059 MHz quartz crystal time base.
Display	6 digits L.E.D display for Time Totalizer function. 8 L.E.D. for RL1 , RL2, TX, RX, SET, HOLD, INPUT & CLK
Setting	By 3 membrane keys on front panel
Count Mode	Count Up / Count Down user selectable.
Relay Action	Normally ON, Normally OFF, Pulse output with relay ON / OFF time from 0 to 999.9 second.
Relay Output	1NO/C/NC relay potential free contact rated 250VAC / 5Amp for RL1 & RL2.
Sensor Supply	+12 VDC, 50mA supply for proximity, infrared sensor, buzzer etc.
Supply	230 V AC 10% 50 Hz OR 110 V AC 10% 50 Hz OR 24VDC.
Mounting	Panel mounting / Wall mounting for Flameproof model.
Dimension	96 (W) X 48(H) X 120(D) in mm. OR 72 (W) X 72(H) X 120(D) in mm.
Cutout	92(W) X 44(H) in mm. OR 68(W) X68(H) in mm.
Cabinet	ABS Plastic
Terminal	'L'type connector for 'Y'type Lugs.
Optional	1) Isolated RS485 Serial port with MODBUS RTU Protocol output for PC interface. Powerful SCADA Software is available. 2) Flameproof version is available on request for hazardous application.
Weight	1Kg. / 1.5Kg (Aprox.)