35mm standard DIN rail installation, complying with standard DIN EN50022
Port: Ningbo/Shanghai Port
Minimum Order Quantity: 5 Piece/Pieces
Supply Ability: 1000000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: standard export carton
Delivery Detail: Within 14 days after you order
HCM120
Three Phase Four Wire Electronic Multi-Rate Din-Rail Active Energy Meter
Application
Model HCM120 Three Phase Four Wire Electronic Multi-Rate Din-Rail Active Energy Meter is a kind of new style three phase four wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. It can display total energy consumption by step motor type
impulse register. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.
Functions and features
1. 35mm standard DIN rail installation, complying with standard DIN EN50022.
2. Single pole width (Modulus 17.5mm), complying with standard DIN43880.
3. Standard configuration 6+1 digits display (999999.1kWh) by step motor type impulse register. May select 5+1 digits display
(99999.1kWh).
4. Standard configuration pulse output passive (polarity), May select distant pulse output passive (nonpolarity). And contact with
all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.
5. Bicolor LED instructions power supply state (green) and signal of energy impulse (red).
6. Automatic detection the direction of the flow of load current. And instructions (Only red energy impulse signal when working ,If no green instructions power supply, that is meaning the direction of the flow of load current reverse).
7. Single direction measurement single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC 62053-21.
8. Directly connect and use, there are two types wiring you may select. Standard configuration type S connection, may select type U connection (Product Configuration code is US).
9. Extension terminals cover, in order to protect to use safety.
Technical parameters
Model | Accuracy | Reference voltage (V) | Current specifications (A) | Starting current (A) | Insulation performance |
HCM120 | Class 1 | 3 x 127/220 3 x 230/400 | 5(30) 10(60) 20(100) | 0.02 0.04 0.08 | AC voltage 4kV for 1 minute, 1.2/50us waveform impulse voltage 6kV |
Outer and mount dimension