Thermostat - RTC75

Heating Thermostat

Introduction:

The RTC75...is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat

The thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.

Application:

For the control of warm-water(floor)heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings...

Features

• 7-day programmable function for energy-saving operation
• On/off control output for heating device
• Symbol indicator when heating device
• Machanical switch key for power supply
• Temperature limitation function for protecting the floor
• 7-day time maintenace in the event of a power failure
• Large size LCD display for better readout
• Key-lock fuction for protecting the setted parameters(especially suitable for Public places)

Technical data

Voltage AC230V(AC110V/AC24V available)

Power consumption 2W

Setting range 5^oC~50^oC(factory setting:5^oC~35^oC)

Limitation scale 4^oC~99^oC(factory setting:28^oC~32^oC)

Setback temperature 5^oC(RTC70.33&RTC70.36)

Switching differential ±0.5k

Ambient temperature -5^oC~50^oC

Protective housing IP20

Housing material Self-extinguishingPC

Floor sensor Rubber-thermoplastic NTC sensor, cable length is 3 m