TUF ultrasonic flow meters measure the water in the large pipeline - ultrasonic flow meters TUF-2000B

- ultrasonic flow meters

Specification:

Linearity. 0.5%

Repeatablity. 0.2%

Accuracy. ±1% of reading at rates>0.2mps

Response time. 0-999seconds, user-configurable.

Velocity, ±32m/s

Pipe size, 15mm-6000mm

Totalizer, 7-digit totals for net, positive and negative flow respectively

Liquid types, virtually all liquids

Security, setup values modfication lockout, access code needs unlocking

Display, 4x8chinese characters of 4x16 English letters

Communication interface, RS-232,baud-rate, from 75 to 57600,protocol made by the manufacturer and compatible with that of the FUJI ultrasonic flow meter, user protocols can be made on inquiry.

Transducer cord length, standard 5m x 2, optional 10m x 2.

Power supply, 3AAA built-in Ni-H batteries, when fuly recharged it will last over 12 hours of operation,

Data logger, built-in data logger can store over 2000 lines of data

Manual totalizer, 7-digital press-key-to-go totalizer for calibration

Housing material. ABS

Case size . 210x90x30mm

Handset weight, 500g with batteries.

Handheld Ultrasonic

Flowmeternewly released low cost portable ultrasonic flowmeter is one of the most powerful clamp-on liquid flowmeters

• High accuracy. ±1% or better of velocity.
• Wide pipe size range (3/4"~240")
• Suitable for all commonly used pipe materials
• Wide flow range (0.03~105ft/s), bi-directional
• Easy and low-cost installation. No need for hole drilling, pipe cutting, etc.
• Non-intrusive. No pressure drop, no pipe disturbance
• Low maintenance
• Signal quality tracking and self-adaptation to match pipe and fluid variations
• Rechargeable battery for 10 hours of operation.
• Built-in data logger

Fixed splitUltrasonic Flowmeter

The product is also a newly released economical clamp-on ultrasonic flowmeter

• Guaranteed lowest price on the market.
• High accuracy. Normally, ±1%. When on-site calibration available, ±0.5%.
• Wide flow range 0.03 to 105ft/s.
• Wide pipe size range (from 1" to 240").
• Noninvasive. No pipe disturbance. No moving parts, no pressure drop.
• Easy and economical installation. No cutting pipe, non drilling hole.
• Suitable for all commonly used pipe materials
• Easy to use and set up. Self-explanatory menu programming
• Velocity, volumetric and totalized flo

Typical Application for ultrasonic flow meters

Influent and effluent water flow (doppler flow meters only)
Clarifier monitoring
Digester feed control (doppler flow meters only)
Waste water (doppler flow meters only)
Cooling water
Makeup water
Pure and ultra-pure fluids in semiconductor, pharmaceutical, and the food & beverage industries (time transit ultrasonic flow meters only)
Acids and liquefied gases in the chemical industry
Light to medium crude oils in the petroleum refining industry (time transit meters only)
Water distribution systems used in agriculture and irrigation
Cryogenic liquids (time transit ultrasonic flow meters only)
Gas-stack flow measurement in power plant scrubbers

Advantages for ultrasonic flow meters

Process contamination free measurement of flow
No leak potential
Allows for easy installation without disturbing existing pipe work
Suitable for aggressive chemicals as no contact with the media
Doppler flow meters are suitable for slurries

Disadvantages for ultrasonic flow meters

Requires sufficient knowledge of the flow and media to give some confidence in readings
Higher initial setup costs than other flow technologies
Pipe material must be compatible with ultrasonic sensor