Creep Laboratory Equipment
1.routine creep,stress-rupture test
2.CE,ISO certification
3.high accuracy,good quality
Port: Qing Dao
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 200 Set/Sets per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: wooden case
Delivery Detail: within 30 working days after receive the deposit
RTH Computerized Electronic Creep Laboratory Equipment
Application:
RTH series is a kind of full electronic creep rupture testing machine to perform routine creep and stress-rupture test., and also can carry on stress relaxation test, high-temperature tensile test in short time, cycle load test (load spectrum test), low cycling test etc.
Specification
Test Load
Max. Load: 30kN, 50kN, 100kN, 200kN
Effective measuring range: 1%-100%FS;
Test load accuracy: ≤1%;
Resolution: 1/60000
High temperature furnace & Temperature-controller
1.Working Temp. range: 400°C~1200°C
2.Length of effective soaking zone: 150mm
3.Furnace pipe & electric furnace size:
4.Furnace pipe: φ90mm (Inner Dia.)×400mm (L),
5.Furnace: φ300mm (outer Dia,)×420mm (L);
6.Furnace life: ≥3000hours (Constant working time less than 1000°C)
7.Furnace Temperature accuracy (°C):
Test Temperature | Temperature fluctuation | Temperature gradient |
≤600 | ±2 | 2 |
more than 600~900 | ±3 | 3 |
more than 900~1200 | ±4 | 4 |
8.Measure & Control temperature meter: digital display, sensitivity: 0.1°C;
9.Auto compensation error of cold end:≤0.5°C;
To be matched freely with thermocouple.
Moving speed of lower grip holder
10.Speed range: 0.005~50mm/min;
11.Error: ±0.5%
12.Timing error: ±0.2%