pressure gauge
1,unit:N / kgf / Ibf
2,Aluminum alloy shell
3,Indication Error +-0.5%
4, low price
Port: Yantian
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 500 Set/Sets per Month
Payment Terms: L/C,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: in wooden case
Delivery Detail: within 20 working after get 30 % downpayment
Equipment discription:
TMP hand compression tension and compression tester can be pushed with a variety of imported and domestic pull pull pressure meter accurate load test, plug power test that is destructive testing.
TH Series Digital push-pull meter produced by our company independently developed, its performance is stable appearance of thick and generous, with inlet pressure sensor with a data output printing device equipped with data on each print line and computer software. The instrument is the most prominent advantage is that data can be set to turn display shows
Note: The direction of the normal display font that is the direction with the keyboard. Flip the keyboard font is the opposite.
Main feature:
• Handheld and clamping design, small size, simple operation and can be combined with simple tooling or fixtures installed on the test machine / measuring machines use;
• Built-in sensors and external sensors are optional;
• all-digital display, easy reading, with high accuracy, high resolution;
• Peak hold function and a continuous load to switch directions;
• Three units of change: can N / kgf / Ibf three kinds of measurement units, and automatically switch;
• Aluminum alloy shell, pressure, abrasion, light hit, but also has good anti-jamming capabilities.
Applicable industry:
Widely used in high and low voltage electrical appliances, electronics, wire, hardware lock, auto accessories, lighters and ignition devices, pens, light industry, construction, fishing, textiles, chemicals, machinery and scientific research institutions and other industries to push and pull load test, plug strength testing, destructive testing, are alternative products of old-fashioned tube-type push pull meter.
Technical parameter:
Model | TH-2 | TH-5 | TH-10 | TH-20 | TH-50 | TH-100 | TH-200 | TH-500 |
Maximum Test Loading | 2N | 5N | 10N | 20N | 50N | 100N | 200N | 500N |
Loading Division Value | 0.001N | 0.001N | 0.005N | 0.01N | 0.01N | 0.05N | 0.1N | 0.1N |
Sensor Install Way | Sensor built in or external are optional | |||||||
Indication Error | ±0.5% |