TDS meter/pen/tester
1 Range: 0~9990ppm (mg/L)
2 Calibration: Factory Calibrated
3 Temperature Compensation:Automatic
Port: guangzhou
Minimum Order Quantity: 500 Piece/Pieces
Supply Ability: 30000 Piece/Pieces per Month
Payment Terms: T/T
Contact SupplierPackaging Detail: standard export packing
Delivery Detail: within 7 days after recieving the payment
TDS meter/pen/tester
SPECIFICATIONS:
*Range:0~9990ppm (mg/L) |
*Accuracy: ±2%F.S |
*Calibration:Factory Calibrated |
*Temperature Compensation: Automatic |
*Operating Temperature: 0~50°C |
*Power source: 2×1.5v(button cell) |
*size: 142X 25X15mm |
*weight: 36g |
OPERATING INSTRUCTIONS
1. remove the protective cap.
2. press the ON/OFF button once out of the water. The tester will read “000”
3. Immerse the tester into the water no more than 2 inches.
4. wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes(10-30seconds), press the HOLD button to view out of the water.
5. press the ON/OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use.
6. after usage, shake off the water from your tester or wipe it with a tissue.
Note: If the tester displays a flashing”X10”icon, multiply the reading by 10.