TDS meter/TDS tester/TDS pen
1 Range: 0~9990ppm (mg/L)
2 Calibration: Factory Calibrated
3Temperature Compensation:Automatic
Port: Guangzhou
Minimum Order Quantity: 500 Piece/Pieces
Supply Ability: 30000 Piece/Pieces per Month
Payment Terms: T/T
Contact SupplierPackaging Detail: standard export packing
Delivery Detail: within 7 days after recieving the payment
TDS meter/TDS meter/TDS pen
1 Range: 0~9990ppm (mg/L)
2 Operating Temperature: 0~50°C
3 TDS meter accuracy: ±2%F. S
4 TDS meter environment:0 to 99°C (32 to 212°F)
5 TDS meter Calibration: Factory Calibrated
6 TDS meter Energy conservation
7 Operating Temperature: 0~50°C
8 Power source: 2×1.5v(button cell)
9 Temperature Commetersation:Automatic
10 TDS meter Easy to change the electrode
11 size: 142X 25X15mm
12 weight: 36g
OPERATING INSTRUCTIONS
1.remove the protective cap.
2.press the ON/OFF button once out of the water. The meter will read “000”
3. Immerse the meter into the water no more than 2 inches.
4.wait for the display to stabilize. The meter automatically commetersates for temperatures variations. Once the readout stabilizes(10-30seconds), press the HOLD button to view out of the water.
5.press the ON/OFF button again to turn off the meter. The meter will shut off automatically after 10 minutes of non-use.
6.after usage, shake off the water from your meter or wipe it with a tissue.
Note: If the meter displays a flashing”X10”icon, multiply the reading by 10.