1. Quickly and easily check grounding systems at anywhere
2. Ensures employee safety.
3. 100% new
Port: Shekou& Shenzhen port
Minimum Order Quantity: 100 Piece/Pieces
Supply Ability: 1000 Piece/Pieces per Week
Payment Terms: T/T,Western Union,paypal
Contact SupplierPackaging Detail: normal or as your require
Delivery Detail: 3-7 days after full payment
Instruction | Impedance calibration | Buzzer |
Low(red) | R<800KΩ | OFF |
Good(green) | 800KΩ≤R≤9MΩ | ON |
High(red) | R>9MΩ | OFF |
Outside size 80(W)×40(H) ×117(D)mm | ||
Power source:9V battery | ||
The length of grounding wire:2.5m |
Operation:
1. Insert the banana plug on the end of the static strap ground cord into the jack located on the front of the wrist strap tester.
2. The wearer of the anti-static wrist strap then pushes the metal pushbutton on the wrist strap tester.
3. A properly operating wrist strap will give an "OK" LED indication on the anti-static wrist strap tester. If either RED "FAIL LOW" or YELLOW "FAIL HIGH" LED's light, and the audible indicator sounds, then the wrist strap should be discarded and replaced with a new one