Super screen ORP tester|ORP Meter|ORP Pen
1 Enetgy conservation
2 Range: -1999 to 1999mV
3 Resolution: 1mV
Port: Guangzhou
Minimum Order Quantity: 100 Piece/Pieces
Supply Ability: 30000 Piece/Pieces per Month
Payment Terms: T/T
Contact SupplierPackaging Detail: standard export packing
Delivery Detail: within 7 days after recieving the payment
Super screen ORP tester|ORP Meter|ORP Pen
1 Enetgy conservation
2 ORP Tester accuracy : ±5 mV
3 Range: -1999 to 1999mV
4 Resolution: 1mV
5 Batteries :4 x 1.5V alkaline
6 Environment: 0 to 50°C,RH 95% max;
7 ORP Tester easy to change the battery
8 ORP Tester easy to change the electrode
9 Dimensions :175x41x23mm
10 Weight :72g
OPERATION
•Remove the protective cap. Do not be alarmed if white crystals appear around the cap. This is normal with ORP electrodes and they dissolve when rinsed with water.
•Turn the tester on sliding the switch on the top.
•Immerse into solution up to the max immersion level.
•Stir gently and wait until the display stabilizes.
•After use, switch off ORP tester,, use the water clean the electrode and replace the protective cap.
Do not use distilled or deionized water for storage purposes.
•Large fluctuations in readings could be due to lack of calibration, dry electrode or rundown batteries.
Attention :during 2-3 weeks, put electrodes in 3mol/L KCL solution for 12 hours, to make sure the reading within accuracy.