Applied for solar cell sorting and testing
Display I-V curve, P-V curve etc
High reliability,high efficiency
easier operation
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 30 Set/Sets per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: Standard export wooden case
Delivery Detail: Within 10-15 days after receiving payment
Solar Cell Module Tester
Model No.: GSMT-H-A
Equipment Features:
Specifications | GSMT-H-A(Horizontal) |
Lamp-house | In line with IEC60904-9 spectral irradiance distribution requirement(AM1.5) |
Spectrum match | 400nm-1100nm Deviation of each wave band < ±25% A grade |
Light intensity | 100mW/cm2(Continuous adjustable range 70~120mW/cm2) |
light intensity non-uniformity | ≤±2% A grade |
Instability degree of irradiation | ≤±2% A grade |
Test results Consistency | ≤±0.5% |
Test error of Electrical properties | ≤±2% |
Single flash time | 10ms |
Effective Test area | 2000mm×1100mm/2000×1600mm |
Effective Test range | 5W~300W |
Measuring voltage | 0~100V (resolution 1mV) |
Measuring current | 0~20A (resolution 1mA) |
Test Parameters | Isc,Voc,Pmax,Vm,Im,FF,EFF,Temp,Rs,Rsh |
Data acquisition | 14-bit 4-channel high-speed synchronous acquisition card. |
Applications and markets:
The equipment is specially used in the electrical performance testing of solar mono-crystalline silicon, poly-crystalline silicon, amorphous silicon cell module, it is the first choice for the solar cell and solar cell module manufacturer.
Options and accessories:
Free options: Horizontal type and Vertical type; with computer, monitor, professional test software, dongle and other necessary spare parts.