Strain Gauge Torque transducers - 1915/1995

Strain Gauge Torque Transducers Model 1915/1995 - more info check here: http://www.buymeasuringtools.com/Strain-Gauge-Torque-transducers-10197546/

Quick Brief

Place of Origin: Belgium Brand Name: BCM SENSOR Model Number: 1915/1995 material: Material: alloy steel, stainless stee...

Specifications and Product Details:

Description

Model 1915/1995 torque transducers are made from alloy steel (1915) or stainless steel (1995) and sealed to IP 66 protection grade for torque measurement applications.

Based on BCM advanced metal foil strain gauge technology, the sensing elements of these 19-series torque transducers are BCM strain gauges. These strain gauges form a Wheatstone bridge to sensing the deformation of the torque transducers, the deformation results from two torques which act around the axis on contrary directions. So the 1915/1995 torque transducer is operated the bottom the transducer is fixed as stationary part, while the top four square as motion part which intend to have torsion shift corresponding to the stationary part. Therefore these torque transducers are served as calibrating instrument of torque wrench, torsion measurement of shaft or concerned torque measurement.

BCM 1915/1995 torque transducers can be used to measure the torques ranging from 100 Lb.in ~ 5000 Lb.ft, and possess higher accuracy up to 0.2%fso. The output signal is Wheatstone bridge output voltage (mV/V) but can be amplified and configured to either 4~20mA current signal or 0.5~5V or 0.5~10V voltages on request. For connecting of both the output signal and electric excitation of the bridge, the electrical 4-pin connector is fixed at side of housing. The 1915/1995 torque transducer features a rigid and compact construction, small dimensions, easy to be installed or replaced in the installation position.

Features:

1. Capacity: 100 lb.in, …, 5000 lb.ft.

2. Accuracy: 0.2 ~ 0.3 %fso

3. Output: Wheatstone bridge circuit output (mV/V)

Amplified signals (e.g. 4~20 mA or 0.5~5 V) are available on request

4. Material: alloy steel (1911), stainless steel (1991)

5. Protection class: IP 65

6. Application: torque wrench and torsion, measurement of shaft

Specifications:
capacity	I=Lb.in F=Lb.ft	100I,250I,500I,750I, 50F,100F,250F,500F,1000F,2500F,5000F
rated output	m V/V	2.0~±0.2
accuracy	%FSO	± 0.2~±0.3
zero unbalance	%FSO	±1.0
non-linearity	%FSO	± 0.2~±0.3
hysteresis	%FSO	± 0.2~±0.3
repeatability	%FSO	± 0.2~±0.3
temperature coefficient of ZERO	%FSO / 10°C	0.2~0.3
temperature coefficient of SPAN	%FSO / 10°C	0.2~0.3
input resistance	Ω	400±30
output resistance	Ω	350±10
insulation resistance	MΩ	≥1000@50 VDC
excitation recommended	V	12 DC /AC
maximum excitation	V	15 DC /AC
compensated temperature range	°C	.-10~ + 40
operating temperature range	°C	.-20~ + 65
safe overload	%FS	120
ultimate overload	%FS	150
cable length	m,shielded PVC cable	1( 5mm 4 wire)