1.Steel fiber optic visual fault locator
2.testing 5km,10km,20km optional
4.working mode is CW and MOD
5.ST, SC, FC
Port: Guangzhou
Minimum Order Quantity: 10 Piece/Pieces 1 sample is accepted
Supply Ability: 5000 Set/Sets per Month welcome OEM
Payment Terms: T/T,Western Union,paypal
Contact Supplier
Packaging Detail: color box and standard carton
Delivery Detail: 2-5 days after payment
Red light pen fiber-optic test fault detector Pen
Features:
1. LD light source
2. working mode is CW and MOD
3. Universally connector for test different ST, SC, FC interferes
4. Stable power output, maximum 30mW
5. Detect long distance
6. enclosure sturdy and durable
7. Pen design,easy to carry and use
Functions:
1. Fiber fracture,bending etc fault location;
2. OTDR blind district check the fault;
3. Fiber identification Port to port;
4. Fiber jumper,Patch panel or connector etc. fault.
Red light pen fiber-optic test fault detector Specificaitons:
| VLP-300A | VLP-300B | VLP-300C | VLP-300D | ||
| Light source wavelength | 650+10nm | ||||
| Single-mode output power | 5mW | 10mW | 20mW | 30mW | |
| Power | Two No.5 batteries | ||||
| Battery operating time(h) | ≥20h | ||||
| Operating Temperature | -10~+60°C(NON-Condensing) | ||||
| Storage Temperature | -40~+85°C | ||||
| Material | Stainless steel or copper alloy | ||||
| Dimension | φ24×170mm(without include interface) | ||||
| Weight | 160g(without include battery ) | ||||
Model No.: UI5000
Features: Electronic Ballast Tester
Model No.: AB-CLP
Features: Absorbing Clamp
Model No.: LPS-1
Features: Lamp Preheat Assistant Source
Model No.: STLST-2
Features: STLST-2 Chloride Ion Permeameter
it can test three specimens at the same time.
Model No.: VOL-PBE
Features: Voltage Probe
Model No.: RB-2
Features: Adjustable Resistance Ballast
Model No.: STWKY-1/STWKY-2
Features: 1. CE certification & EN standards
2.Cement setting time
3. Standard manual operation
4. Needle: 1mm diameter and 50mm long;
Model No.: GNG-*
Features: "Go" and "Not go"gauge
Model No.: UI2002A
Features: Electronic Ballast High Frequency Parameters Tester
Model No.: IS-xM
Features: Multi interface Integrating Sphere
1. DIA: 0.3M-2M. Other size can be designed according request.
2. Can not be used single
Model No.: WB2681A
Features: insulation resistance tester
Model No.: YST380
Features: 1. For hydraulic pump/ valve/motor/culinder
2. 380L/min
3.35Mpa
4. ISO,CE certafication