Rated test pressure:0-100Mpa
Pulse frequency: 0.05-1.25 speed (three times/min-75 times/min)
Test medium: mineral oil
Port: tianjin
Minimum Order Quantity: 1 Set/Sets more than one sets
Supply Ability: 10 Set/Sets per Week one week
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: wooden case or as buyer require
Delivery Detail: with in 15 days
Product technical parameters:
Product name:Steel pulse test machine
Product meet standards
CB 1103 1984 hydraulic pressure pulse test method.
Second, the technical parameters
1: rated test pressure:0-100Mpa,
2 pulse frequency: 0.05 ~ 1.25 speed (three times/min ~ 75 times/min),
3 at ambient temperature; :
4 medium temperature, temperature ~ 60 ° c,
5 and test line: 1-8,
6 test waveforms: basic square-wave or water hammer wave (see figure),
7. Installation: 180o or 90o, According to the prescribed standards (install specimens),
8. Test medium: mineral oil,
9 tank 600L; effective volume:
The company by American NI LabView platform independent development of measurement and control software, the advanced processing and print test pressure, temperature, test times, the frequency, pulse waveform,
11. Set to automatically stop after testing time,
12 trials tubing burst or leakage, the oil temperature, pressure setting value beyond beyond automatically stop protecting test,
13. Sample room door open not installed, only after the closing on to boot,
14 test data, can save time beginning to test query test end all test data.
Third, the applicable scope
Steel pipe and pipe fittings of pulse test