Solar PV Module Wet Leakage Current Tester - HTPV-03A

Solar PV Module Wet Leakage Current Tester

1.MeasuringDetect whether rain, fog, dew or snow melt moisture can entering the the internal circuit of module ,to prevent suffer from corrosion, leakage, resulting in non-safety incidents

2.According to IEC61215-2005,IEC61646-2008,IEC61730:2-2004,UL 1703-2004

Technical parameters

1.Test Items: test for pressurization (wet leakage) and Insulation resistance

Pressurization test : 0-6000V adjustable,0-999S adjustable

2.Insulation resistance test:0-9999MΩ, time 0-999S adjustable

3.Test accuracy: ±1% for pressurization test ,±5% for Insulation resistance

4.Water temperature control :22±3°C ,temperature Accuracy :±1°C

5.Conductivity range :0-1MΩ.cm ,accuracy ±100Ω.cm

6.Maximum module dimensions :2200mm×1200mm

Specification

1.Test tank :2200*1300*250mm(W*D*H)

2.External dimensions :2300*1400*900mm(W*D*H)

3.Temperature : 22±3°C

4.Liquid resistivity < 3500Ω·cm

5.Spray pressure 34.5kpa

6.DC current source >500V

7.Power :AC 220V 50Hz 25A

Major equipment

1.Shallow groove container :pp material ,high degree of insulation ,corrosion- resistant

2.Base :Stainless steel sus304

3.Sprinkler : UL Sprinkler

4.Conductivity Meter : Mettler - Toledo FE30K

5.Temperature control loop system :Stainless steel sus304

6.Thermostat : U.S. Honeywell temperature controller DC1040

7.Magnetic pump : U.S. Mitre MITER-MP-6RZ

8.Submersible pumps : ultra-quiet speed automatic brand from China Dasu

9.Control box : standard control box

Main function

1.Measure conductivity of water

2.Conductivity with temperature compensation

3.Can heating, insulation temperature set used for spray water automatically

4.Multi-directional spray docking Box ,pressure and flow adjustable