temperature converter
1)Settings with HART-protocol
2)Fault signal alarm
3)Galvanic isolation
4) wide measuring range
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 1000 Unit/Units per Month
Payment Terms: T/T
Contact SupplierPackaging Detail: standard
Delivery Detail: within 2 weeks after payment received
Smart &HART temperature head converter MS182
Description
MS182 is a smart in-head transmitter module with HART® -protocol. It has measurement input for resistance Thermometers (RTD), thermocouples, resistance or millivolt signals in 2-, 3- or 4-wire connection, and converts various input signals into a standard 4 to 20 mA analog output signal after linear processing. The transmitter is programmable directly from PC or via the HART communication. Isolation is provided between the input and output. A special signal can be set in advance while the sensor burnout or short.
Technical Characteristics
Programmable: Use PC or the hand operator
Measuring range: Set via PC or by the hand operator
Input type: RTD, TC, R or Millivolt signal
Convert accuracy: ≤0.1%FS
Cold junction accuracy: ±1°C(TC)
Output : 4~20mA/20~4mA Electrical isolation output
HART –Protocol output
Max-load: (V -13V)/0.025A(Current output )
Limit current: ≤25mA
Response time: 1s
Isolated voltage: 1500V AC (input/output)
Alarm signal: Programmable
Underranging linear drop to 3.8 mA
Overranging linear rise to 20.5 mA
Sensor break or short-circuit: ≤3.6mA or ≥21.0mA
Power supply: 13~30V DC
Temperature drift: 0.01% FS/1°C
Long-term stability: ≤0.1°C per year or 0.05 %per year
Ambient: -40~+85°C
Field of application
Temperature head transmitter with HART® -protocol for converting various input signals into a standard 4 to 20 mA analog output signal
Input:
-Resistance thermometer (RTD)
-Thermocouple (TC)
-Resistance transmitter (Ohm)
-Voltage transmitter (mV)
HART® -protocol for front end unit or panel unit operation using the hand operating
module (MS275, MS375,PDAN800,PDA S900) or PC
Electrical connection
Wiring
Demension
Package