Smart Battery Monitoring - BMU007

INTRODUCTION:

In communications, power, microwave systems, The battery unit is the important stored energy equipment, it can ensure the communication equipment and power equipment uninterrupted power supply. If can’t manage the battery unit properly. such as over charge, over discharge and cell aging phenomenon would lead to the battery damage or The battery capacity drops sharply (even if only one battery deterioration, will affect the entire group of cells), thus affecting the security of electricity supply. Therefore, real-time monitoring the battery is very importance.

MAIN FUNCTION

1.Real-time measurement of single cell voltage of 40

2.Real-time monitoring of the total battery voltage battery

3.Real-time monitoring battery charge and discharge current with an external current sensor

4.Stored charge and discharge voltage curve

5.Real-time monitoring two-way of cell surface temperature with an external temperature sensing probe;

6.Reserved two analog channels to the users;

7.The channel measurement errors can be subtle calibration PC software

8.Through RS485 the upload data, the coordinate monitoring software carries on the management to the battery unit

9.Can achieve more than one cascade, cascade up to 32.

SPECIFICATIONS

1.Power supply:AC85-220V 50Hz

2.Communication Interface: RS485/RS232;

3.Communication Parameters:Baud Rate(2400/4800/9600(Default)/19200bps),

Address(0(Default)-255);

4.Single voltage range:0.8-2.5V(single cells 2V)/0.8-10V(single cells 6V)/0.8-17V(single cells 12V);

5.Single voltage accuracy: ±1%;

6.The total voltage range:0-100V(single cells 2V)/24-600V(single cells 6V/12V);

7.Current sensor interface:0-5V;

8.Current Accuracy:±1%;

9.Other Analog type:0-5V;

10.Other Analog Accuracy: ± 1%;

11.Temperature Sensor Type:NTC;

12.Temperature range:-10°C-50°C;

13.Temperature error: Under Normal temperature±0.5°C,Throughout the range±1.0°C;

14.Working environment: -10-60°C, -10%-80% RH, non-condensing;

15.Dimensions: 1U