1.Single phase din rail energy meter
2.Two poles width,LCD display
3.5(30)A 10(40)A 15(60)A
4.Option RS485 communication
Port: Ningbo or shanghai
Minimum Order Quantity: 30 Piece/Pieces
Supply Ability: 6000 Piece/Pieces per Week
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: white box+carton
Delivery Detail: about 8 working days after receive your payment
DDM65SC Single phase din rail energy meter
The meter is used to measure 50Hz or 60Hz active energy consumption from single phase two wire AC electricity net.
The features of small size & DIN-rail mounting makes it suitable for installation in distribution boards and small standard enclosures.
The meter is widely used in the office buildings, shopping malls, residences, airports and metro,etc.
FUNCTIONS AND FEATURES:
♦35mm standard DIN rail installation,complying with standard DIN EN50022.
♦Two poles width.
♦LCD 6+1 digits display without backlighting,may select with white backlighting.
♦Standard configuration one port of pulse output passive (polarity),may select increase a distant port of pulse output
passive (nonpolarity). And contact with all kind of AMR system conveniently,complying with standard IEC 62053-31 and DIN 43864.
♦Bicolor LED instructions respectively power supply state (green) and signal or power impulse(red).
♦Automatic detection the direction of the trend of load current. And Instructions on individual LED (Only red power impulse
signal when working. If no green power,means the load current reverse).
♦Single direction measures single phase two wire active power consumption. It is nothing with direction of the flow of load current,
complying with standard IEC62053-21,IEC62052-11.
♦Directly connect operation.
♦Standard configuration short terminal cover, which is helpful to reduce installation space and make it convenient to install;May select
extended terminal cover, which is for protecting the safety of using electricity.
TECHNICAL PARAMETERS | ||||||||||||||||||||||||||||||||
|