Single Phase Energy Meter PZ72L-E/K - PZ72L-E/K

1.General
PZ72L-E is a kind of single phase power analyzer which can measures the data of single phase network. They comply EN 61326:2006 and EN 61010-1:2001.
They are a kind of programmable analyzer. With the 4 key on the front, we can set their parameters according to the network which we measure. They have many option functions. They can be equipped RS-485 communication Modbus-RTU; or they can output analog signal. With digital output, we can realize controlling other equipment remotely.

They are a kind of analyzer with excellent cost performance, since they regroup the functions of traditional electric transmitter and digital meters. Therefore they are widely being used in kinds of control system, SCADA system and power management system.

2.Technical Measure
- Measurement: I,U,F,P,Q,S,PF,kWh, kVarh,kVAh
- Network: Single-phase
- Frequency: 45 ~ 65Hz
- Voltage: AC 120V,230V 400V (programmable);

overload: 480V (continuous); 800V during 30s; Consumption: < 0.2VA
- Current: AC 1A, 5A (programmable);

Overload: 6A (continuous); 50A during 30s; Consumption: < 0.2VA
- Thermal drift: <200ppm
- Transformation ratio: CT and PT ratio programmable
- Precision: 0.5 (F: 0.05Hz; kVar: 1)
- Power supply: AC/DC 85 ~ 270V; Consumption < 4VA
- Test voltage: 2kVAC/min (voltage input / power; between current inputs); 1.5kVAC/min (outputs / power)
Insulation: input / housing and output / housing >100MΩ
- Work T: -20C ~ +55C;Storage T: -20C ~ +70C
- Relative humidity: 5% ~ 95% (no condensation)
- Altitude: < 2500m

3. Options
- Communication (/C) : RS485 (Modbus-RTU);

1 start bit, 8 data bit, 1 stop bit, no parity,

speed (1200/2400/4800/9600/19200)
- Alarm output(/J): 1 passive relay (1A/30VDC, 1A/250VAC):

alarms of over voltage, low voltage and over current;

The hysteresis and the delay can be programmable
- Analog output(/M): DC4 ~ 20mA, DC0~20mA( load < 600Ω),

DC0 ~ 5V,DC1 ~ 5V( load > 1kΩ)
- Digital options(/K): 2DI/2DO;

DI: dry contact Input, supplied inside, optoisolator;

DO: NO-NC contact; 1A/30VDC,5A/250VAC (to control other equipments)
- Pulse output (/P): 1 or 2 pulse outputs (open-collector),
- Accuracy: 0.2s

4. Order example
Before your order, please inform us the range of current inputs and voltage inputs and options you need.
For example:
Need the single phase 72 model ammeter with RS485 communication, 2DI/2DO and LCD display, the range of current is 0-5A
The product type is PZ72L-E/KC