Single phase kwh meter with Rial Mounted!35 mm din rail installation
Port: Ningbo or shanghai
Minimum Order Quantity: 100 Piece/Pieces
Supply Ability: 3000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: 60PCS/CTNS
Delivery Detail: 20days wiith advanced payment
35 mm din rail installation
Din rail active energy meter ( kwh meter)
6 pole width
35mm standard DIN rail installation, complying with standard DIN EN50022.
Or front board setting (mounting holes center distance 63 mm), users can choose any
one by themselves.
Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
Standard configuration 5+1 digits display (99999.1kWh) by step motor type
impulse register. May select 6+1 digits display (Product Configuration code is AK).
Standard configuration one port of pulse output passive (polarity),May select increase a
distant port of pulse output passive (nonpolarity), (Product Configuration code is AI).
And contact with all kind of AMR system conveniently,complying with standard IEC 62053-
31 and DIN 43864.
Two LED instructions power supply state (green) and signal of energy impulse (red).
Standard configuration dont detection direction of the flow of load current. May select
automatic detection the direction of the flow of load current. And instructions (Only red
energy impulse signal when working, that is meaning the direction of the flow of load
current reverse).
Single direction measure single phase two wire active energy consumption. It is nothing
with direction of the flow of load current. Complying with standard IEC 62053-21.
Directly connect operation, there is two types wiring you may select. Standard
configuration type S wiring, may select type T wiring (Product Configuration code is TG).
Standard configuration short terminals cover, may select extension terminals cover, in
order to protect to use safety. (Product Configuration code is AH).