FLUKE 715 Digital Voltage Current Process Calibrator
Voltage Calibration Meter.
Current Calibration Meter.
Loop Power Output
Port: Shenzhen
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 120000 Piece/Pieces per Month
Payment Terms: T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: Carton box for outer, gift box for unit
Delivery Detail: 5 ~ 30 days
Similar to FLUKE 715 Digital Voltage Current Process Calibrator:
* Calibrating Voltage current instruments
•source and measurement tool being used in measurement or output 0 to 24 mA DC current loop, and 0 to 10 V DC voltage.
•Display: Clear 5 digit LCD
•Measure loop current (0-20 mA, 4-20 mA) signals with accuracy of 0.015% and 1 mA resolution
•Measure voltage output process signals from PLCs, transmitters
•Source or simulate 24 mA loop current
•Source voltage to 100 mV or 10V
•24V loop supply with simultaneous current measurement
•Enhanced voltage and current measure and source accuracy
•Improved battery life
•250 ohm HART resistor with loop power
•Holster features test lead storage
•Compatible with toolpack magnetic hanging system
•Step and linear ramp output function
•Configurable zero and span settings
• Operating temperature: -10°C~55°C
• Storage temperature: -40°C~60°C
• Dimension: 190*89*42mm
Technical Specification:
1.Measurement and output voltage parameter:
Function | Range | Resolution |
DC V mV Input | 0 ~ 100 mV | 0.01 mV |
0 ~ 10 V | 0.001 V | |
DC V mV Output | 0 ~ 100 mV | 0.01 mV |
0 ~ 10 V | 0.001 V |
2. Measurement and output mA parameter:
Function | Range | Resolution |
DC mA Input | 0 ~ 24 mA | 0.001 mA |
DC mA Output | 0 ~ 24 mA | 0.001 mA |
3. DC V Input and Output
Range | Resolution | Accuracy ±(% of reading + Counts) |
100 mV | 0.01 mV | 0.02 % + 2 |
10 V | 0.001 V | 0.02 % + 2 |
Input impedance: 2MΩ (nominal),< 100pF Over voltage protection: 30 V Voltage driver capability: 1 mA |
4. DC mA Input and Output:
Range | Resolution | Accuracy ±(% of reading + Counts) |
24 mA | 0.001mA | 0.015 % +4 |
Overload protection: 125 mA,250Vfast acting fuse Percent display: 0%=4mA,100%=20mA Source mode: compliance 1000Ω at 20mA for battery voltage ≥6.8V, (700Ω at 20mA for battery voltage 5.8 to 6.8V) Simulate mode: External loop voltage requirement: 24V nominal, 30V maximum, 12V minimum. |
5. Loop Power: 24mV±10%
Factory Tour:
Accessories:
Holster, Test Leads , 9V battery, 9V battery, Manual.
Warranty: One year