SX751 Portable pH/ORP/Conductivity/TDS/Salinity/Resistivity/Dissolved Oxygen Meter:1.Auto calibration
2.Auto temp. compensation
SX751 Portable pH/ORP/Conductivity/TDS/Salinity/Resistivity/Dissolved Oxygen Meter
|Automatic Calibration||1 point|
|Automatic Salinity Compensation||(0~45)ppt|
|Manual Air Pressure Compensation||(66~200)kPa|
|(0~20)minutes, set up by user|
|(42×33)mm, blue backlight|
|2×AA batteries (1.5V×2), life of battery>100 hours|
|IP57 dustproof and waterproof|
Quality and Safety Certification
|ISO9001:2000, CE and CMC|
Dimension & Weight
|Portable Case||(360×270×76)mm/ 1.7Kg|
1. 201T-S Plastic pH Tree-in-one Electrode
2. 301Pt-S ORP Combination Electrode
3. 2301-S Plastic Conductivity Electrode (ATC, K=1)
4. DO500 DO Electrode
5. pH Calibration Solution: pH 4.00,7.00, 10.01/50mL, 1Bottle Each
6. Conductivity Calibration Solution: 1413mS/cm/50mL
7. Portable Case.
SX700 Series of Waterproof Portable Meters
1. Special waterproof connector which four different electrodes (pH, ORP, Conductivity, DO) can be plugged into, ability of the meter to recognize automatically those electrodes.
2. IP57 waterproof, applied even under the difficult conditions.
3. “Mobile Laboratory” – meter, electrode, standard solution and other accessories are all in a portable case.
4. Advanced pH measurement mode
•Automatic calibration, options of three series of pH buffer solution.
•Ability to set two special pH measurement modes of high purity water and ammonia added purity water.
•2503DT pure water pH electrode with a built-in temperature probe, applied in pH measurement of high purity water.
5. The most advanced conductivity measurement mode
•Adopts one common two-ring conductivity electrode (k=1, built-in temperature probe), only one-point calibration, measurement range: 0.5μS/cm~200μS/cm, accuracy≤±1.5%FS.
•Automatic switches of range, automatic non-linear temperature compensation for high purity water.
•DJS-0.1/T conductivity electrode (k=0.1, built-in temperature probe, with a flow tube assembly), applied for measurement of the high purity water<1μS/cm.
•Ability to switch among Conductivity, TDS, Salinity and Resistivity.
6. Advanced dissolved Oxygen measurement mode
•DO500 Dissolved Oxygen electrode can simultaneously measure DO, Conductivity and Temperature to realize automatic salinity compensation for DO measurement.
•Polar gram type DO electrode with special electrode calibration sets, electrode polarization for only 3 to 5 minutes.