SV-5Q vehicle emission gas analyzer - SV-5Q

SV-5Q vehicle emission gas analyzer

in accordance with non-light-disguising infrared absorption method, via micro-computer analysis, directly measure the thickness of HC, CO and CO₂in the exhaust gas of vehicles and inspect the density of NO and O₂via Electrochemical sensor so as to calculate excess air coefficient λ. The analyzer introduces advanced foreign technology. It is composed of complete imported machinery cores, boasts the advantages of accuracy measurement, high endurance and speed. As an Intelligent Equipment, it is equipped with Microprocessor, LCD and Chinese language interface. Besides, it also has optional equipments such as Induction Tachometer, temperature sensor, inner Micro Printer for customers to purchase. The newly-added Storage function can detect Engines speed and Lubricants Temperature while measuring tail gas, then store and print the results.

The main technical parameters:

1. Environmental temperature

Temperature-5-40 humidity: 95% Air pressure: 70.0-106kPa Power: AC 220V±10%;50Hz±1Hz

2.Measuremnt scopeHC: 0-1000010-6ppmvol CO: 0-10.0 10-2(%)vol

CO₂: 0-20.0 10-2 (%) volO₂0-25.0 10-2(%)volrotate speed0-10000rpm

NOx: 0-5000 10-6ppmvoloil temperature0-120

3.Sampling methodtail gas:

sampling directly .The length of sampling tube: 5m,the length of probe:900mm.

Oil temperatureinserting the head of thermo scope into the staff gauge of engine lubricant, the length of which is the same as that of oil staff gauge; blocking with rubber plug to plug up engine oil from ejecting: length of lead: 5m.

Rated rpm Non-contact measurement method. Less than 20cm to the petrol high-voltage flexible cord, measuring petrol rotate speed.

4.preheat time10mins

5.resolutionCO 0.01%volHC: 1ppmvolnormal hexane equivalent CO₂: 0.01%volO₂: 0.01%vol

NOx: 1ppmvol rate speed 1rpm oil temperature 0.1

6.indicated errorCO±0.06% vol or±5% relative error. HC: ±12ppm vol or ±5% relative error

CO₂: ±0.5% vol or ±5% relative error O₂: 0.1% vol or±5% relative error

NO±25ppm vol or±5% relative error rate speed ±10rpm(0-10000rpm) ±1% measured value (>10000rpm)

7.Stabilityafter preheating, zero excursion and measurement distance excursion in 4 hours should not be over the allowance value of sample value error

8.Repetitiveness: ≤1/2 of absolute of the allowed sample value error

9.Output signal: Number volume: RS232 serial massage exit