hot wat er flow meter

SBL target flowmeter with digital display is a completely new force induction target flowmeter developed based on measurement principle of traditional target flowmeter, making full use of most excellent features of the same, and in combination with new transducer technology and modern digital technology. This product not only features the characteristic of no movable part as in traditional flowmeters such as target flowmeter, orifice flowmeter and vortex flowmeter, but also a measurement accuracy matching that of volumetric flowmeter. In addition, this product has the performance against interference and impurities, and is light and reliable, hence is widely used in petroleum industry, chemical engineering, energy industry, food industry, environmental protection and water conservancy etc.

SBL target flowmeter with digital display has the following main types and forms:

1) Types:

· Liquid flowmeter: normal temperature and high temperature

· Gas flowmeter: normal temperature and high temperature

· Steam flowmeter: saturated steam and superheated steam.

2) Forms and corresponding sizes

· Pipeline type: Threaded pipeline type: size of DN15~DN80 (mm)

Flanged pipeline type: size of DN15~DN300 (mm)

· Clamped mounting type: size of DN15~DN600 (mm)

· Inserted type: size of DN100~DN2000 (mm)

Inserted type includes fixed type and telescopic online removable type.

3) Description of flowmeter models

(fir upgrading of graphic or model, no notice or modification will be provided. For product model, confirmed type selection during ordering shall govern).

3.3 Product models

3.3.1 Meanings of model

Notes:

· Size of flowmeter flange shall execute relevant technical parameters specified in state standards GB/T9115.1~9115.4 —2000 and GB/T. Technical conditions and types can execute American and European system standards as required by user.

· For flowmeter type selection, user shall specify various requirements on flowmeter according to format of model

· In case user requires diameter, nominal pressure and output form not provided in this description of models, a corresponding description shall be provided.

· When selecting high temperature type flowmeter, in addition to filling the described format, especially note highest operating temperature of measured medium.

· For flowmeter with temperature or pressure compensation, in addition to filling the described format, especially note ranges of operating temperature and pressure that require compensation.

· In case user requires special material of measurement tube and/or internal lining, this shall be noted.

4) Example of type selection

SBL—AY250CCNTIX means: flanged pipeline type target flowmeter with digital display, liquid measured media, nominal diameter of 250mm, normal temperature of media, nominal pressure of 1.6Mpa (flange size), stainless steel measurement tube, temperature compensation, 4~20mA current output, and intrinsically safe explosion-proof sign.

Table flow measurement range for saturated steam under operating pressure