SBL digital target flow meter SBL

Specifications and Product Details:

SBL digital target flow meter

Characteristics

l Measurement flow of liquid, gas, steam, ropy mediums or ambulatory mediums in low, normal or high temperature condition.
l Total quantity measurement accuracy is not less than 0.2%.
l High sensitivity, able to measure very low velocity below 0.8m/s.
l No movable part, safe and reliable.
l Wide measure range, bigger than 1:30.
l Good repeatability, generally 0.10.08% , fast to measure.
l Small pressure loss, only about 1/2P of Standard Hole Board.
l Able to adopt hang weight method to test the flow meter.
l Measurement range can be changed by replacing target according to need.
l LCD display.
l 4-20mA, 0-10V, impulse, and RS485 outputs.
Easy installation and maintain.

what make our target flowmeter better and different than other flow meters are as following
1. target type flow meter won the characteristic of anti-impurity.
eg. other flow meter can not test waste water, impurity fuel, base oil...but, we can
2.target type flow meter can anti-interfere.
eg. even near the pump, the accuracy won't be effected.
3.target type flow meter strongly anti-sticky.
eg. strong sticky fluid like bitumen can be tested
4.target type flow meter have corrosion resistance
eg.sulfate...
5. target type flow meter has no removable.
that means, all functional parts are install in one target flow meter, just install the flow meter by our introduction, everything will be ok.

main technical indices
Measured media	Liquid, gas, steam
Nominal diameter	Pipeline type 15~300mm		Clamped mounting type 15~600mm			Inserted type 100~4000mm
Nominal pressure	0~55MPa		0~55MPa			0~55MPa
Media temperature	-20~70^oC(normal temperature type) -196~+700^oC(high/low temperature type)
Accuracy	±0.2%	±0.5%		±1.0%	±1.5%		±2.5%
Range degree	1:10	1:15		1:30	1:100 (gas)		1:15(steam)
Compensation type	Temperature compensation; pressure compensation
Repeatability	0.1%~0.08%
Power supply	Built-in 3.6V Li batter; external power supply of 24VDC; 220VAC (only for separate type)
Output forms	Site display reading; 4~20mA (2-wire system); pulse; 0~10V; RS232/RS485 (optional),HART PROTOCOL
Material	Carbon steel; s.s.304; s.s.316L; also supplied to user requirement
Explosion-proof sign	Intrinsically safe type (ExiallCT4); Explosion isolating type (ExiallBT4)
Protection class	IP65; IP67;IP68

Note: Size of flowmeter flange shall execute GB/T9115.1~9115.4~2000 series standard. For pipeline type, small diameter flowmeter of DN6, DN8, DN10 etc. can be manufactured to user requirements.

Notes: a. Connection flange shall execute relevant technical requirements in state standard GB/T9115.1~9115.4-2000;

b. Dimensions A and B of special order and high/low temperature types, and temperature/pressure compensation types shall conform to dimensions of conventional products;

c. Standard flanges from other countries (Japanese standard, German standard and USA standard etc.) belong to special order;

d. When media temperature of high temperature type flowmeter is >200, the instrument must installed up-side-down and horizontally. The design shall consider sufficient mounting space;

e. When media flow up-down or down-up, for ordering, please note: right view, left view (showing gauge head).