Round-The-Clock impact Tester is according to ISO standard, the direct tester for impact resistant of hard plastic pipe.
Port: FOB SHENZHEN
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: wooden box, export standard
Delivery Detail: within 15 days
Round-The-Clock impact Tester
Purpose:
Design is according to ISO standard, the direct tester for impact resistant of hard plastic pipe. Use a striker drop off by its own to get a quick result, check the broken and quality. This machine has many special design, safety operation, high precision drop down, hammer striking height adjusting and etc. satisfied for all the requirements.
Specification:
Product specification | ISO -3127 for the thermoplastic pipes |
Control method | Electromagnetic control |
Testing height | 0~2m |
Weight of drop striker | 0.25, 0.5, 0.75, 1.25, 1.375, 1.75, 2, 2.25, 2.75, 3.75, 4, 5.75, 7.5kg |
Specimen | 16~630mm, L for 300mm |
Gulde-tube of striker | Dual-tubes made of stainless steel (each one with the independent electromegnetic controller) with view window |
Setting of test height (adjustable) | Actuated by motor, it can be set either by the control box or by IR remote controller |
Weight of drop striker | 2kg (adopt small guide-tube of the striker); 2~7.5kg (adopt large guide-tube of the striker) |
Drop striker | 25mm |
Specimen fixture | 120°V slot, L for 300mm, |
Adjustable distance of guide-tube | 650mm by hand, SUS pipe load balance system |
Control box | Detached tyype with upper/lower safely control as well as the alert indicator |
Dimension (WxDxH) | Main unit: 50x100x380cm. Control box: 37x37x104cm |
Safety device | Specimens surroundings with safety mesh |
Power | AC220V 0.5A or specified by user |