1,Communicates easily using either ,
2,4-20 mA/HART ,
3,Quality assurance.
Minimum Order Quantity: 1 Piece/Pieces
Payment Terms: T/T,Western Union
Contact SupplierPackaging Detail: Rosemount package
Delivery Detail: 3-4weeks
- Versatile and easy to use GWR Level Transmitters
The Rosemount 3300 provides reliable and cost effective level measurements in a wide range of applications. Guided Wave Radar technology combined with advanced signal processing and sensitivity enables the Rosemount 3300 Series to deliver both level and interface measurement data from the same transmitter. The 3300 series is now available with a new line of innovative probes, designed to perform reliably and withstand even the toughest process conditions. Two-wire connections ensure easy and inexpensive installation. Features include:
A wide range of probe styles to cover virtually any application
-Multivariable, loop-powered level and interface transmitter which reduces tank penetrations and installation cost
-Direct Level Measurement means no compensation required for changes in temperature, pressure, density, dielectric or conductivity
-Easy-to-use Radar Configuration Tools makes setup quick and easy and provides diagnostics with waveform plotting and logging tools
-Virtually unaffected by dust, vapor and interfering obstacles
-Robust modular design resulting in low operating cost and increased safety
-Easily integrated into exisiting HART and Modbus plant architecture.
-Rosemount 9901 – high quality chambers for process level instrumentation
Measurement Principle | Guided Wave Radar using TDR (Time Domain Reflectometry) Technology |
Maximum Measuring Range | 77 ft (23,5 m) from upper reference point |
Instrument Accuracy | ± 0.2 inch (5 mm) for probes ≤ 16.4 ft (5 m) |
± 0.1% of measured distance for probes > 16.4 ft (5 m) | |
Power Supply | Loop-powered (2-wire), 11-42 VDC (11-30 VDC in Intrinsically Safe (IS) applications, 16-42 VDC in XP applications) |
Output | 4-20mA with superimposed digital HART® communication Modbus |
Temperature/Pressure Rating | Refer to the Product Data Sheet |
Hazardous Location Approvals | ATEX: Flameproof and Intrinsic Safety |
CSA: Explosion-proof and Intrinsic Safety | |
FM: Explosionproof and Intrinsic Safety | |
IECEx: Eplosionproof and Instrinsic Safety | |
Display | Integral digital display (Option) |
Output Variables | Level, Distance, Interface Level, Interface Distance, Volume, Internal Temperature (Housing), Aout current and % of Range |
Enclosure | Polyurethane-covered die-cast Aluminum or stainless steel housing with dual compartments |
Ingress Protection | NEMA 4X, IP66 |
Level measurement in small tanks and tanks with
disturbing obstacles, turbulence or vapor
The Rosemount 3300 Series delivers reliable level data where
even other radar transmitters fail. The high signal/noise ratio
in the transmitter and the radar pulse focused along the probe
helps eliminate echo interference problems. Thus,
the 3300 Series transmitter with a suitable probe will provide
reliable measurements in process vessels containing baffles
and heating coils. Nor will turbulent liquids or vapors
affect the level data.
Level gauging in bridles
Guided Wave Radar is also the best choice for bridle measuring.
The Rosemount 3300 Series transmitters work in bridles with
pipe inlets, varying diameter, and other configurations.
As both level and interface can be measured with the same probe,
only one single bridle is required for dual level measurement
Measurement of solids in silos
Guided Wave Radar is the most reliable method for measuring solids,
such as powders, granulates or pellets. With the Rosemount 3303,in preparation measurements can be made even on fine powders
in dusty environments and in silos without horizontal surfaces,
where free propagation radar transmitters are unsuitable.
Level gauging in LPG and ammonia tanks
Liquid gas and other pressurized applications demand
maintenance free measurement equipment. Since the
transmitter head can be serviced without breaching
the tank atmosphere, the Rosemount 3300 Series is
perfect for pressurized and volatile applications where
tank opening must be minimized. And since it operates
with a DC pulse with minimum signal attenuation in
heavy vapors, the 3300 Series is the best choice for
measurement of liquid ammonia.
Interface level measurement
The Multivariable™ Rosemount 3302 is the only
loop-powered transmitter on the market to deliver
multi-level measurement. Thanks to its advanced
signal processing, it measures both top surface
and interface level in tanks containing different
liquids, such as oil and water.