Product Features:
Remote Terminal Unit
32 impulse signal inputs
RS485 (Modbus-RTU)
IEC61000
Business Terms:
Port: Shanghai
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 100000 Piece/Pieces per Year
Payment Terms: L/C,T/T
Contact Supplier
Remote Terminal Unit
32 impulse signal inputs
RS485 (Modbus-RTU)
IEC61000
Port: Shanghai
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 100000 Piece/Pieces per Year
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: packed by case
Delivery Detail: within two weeks
1. General
The PZ-P32 serves the function of collecting pulse signals and converting them to digital signals for data exchange with MODBUS communication interface. It is used as the hardware unit of Remote Status Indication of Substation Supervisory & Control System. It is also applicable for other intelligent systems in which Remote Status Indication is required. The PZ-P32 unit allows the simultaneous collection of 32 pulse signals of active or reactive watt-hour meter. The unit is connected to upper computer with an RS485 interface and utilizes Polling for data exchange to reflect the switch status on a real-time basis.
2. Technical feature
- Input 32 Pulse inputs (Passive Dry Contact or Active Wet Contact)
Pulse Width ≥10ms
Max Number Pulse 4294967296 (4 bits)
- Power Supply Voltage range 24 VDC(18-36VDC) or AC/DC 80-270V
Consumption ≤ 5W
- Communication Bus Mode 2-wires half-duplex RS485/Modbus protocol
Bus Capacity ≤ 32
Response Time 20ms
Baud rate 9600 / 4800 / 2400 / 1200 bps
- Capacity of Sequence of Events (SOE) ≤2000
- Degree of Protection IP40, Terminal IP20
- Isolation 2Kv/1min,50Hz ( inputs, output and supplier)
- Work Temperature -5C - 55C
- Storage Temperature -25C - 85C
- Mounting TS35 Standard DIN rail
- Dimention 160 × 50 ×110mm
- Standards
IEC61000-4-2: 1995 Electrostatic discharge immunity test Level 3
IEC61000-4-3: 1995 Radiated, radio-frequency, Level 3 electromagnetic field immunity
IEC61000-4-4: 1995 Electrical fast transient pulse immunity test Level 3
IEC61000-4-5: 1995 Surge immunity test Level 3
EN55022: 1998 Information technology equipment(ITE) Level B
Model No.: BH500B
Features: Digital Scales
1.Large LCD display with color backlight
2.4Units selection
3.RS-232 connection:printer,computer
4.AC-DC alte
Model No.: DDB-6200
Features: Conductivity Meter for lab test and analysis
Micro processor control
Power off protection
Temp.compensation
Stable operation
Model No.: DDS-11A
Features: Conductivity Meter for lab test and analysis
Micro processor control
Power off protection
Temp.compensation
Stable operation
Model No.: JPBJ-607
Features: Dissolved Oxygen Analyzer JPBJ-607
Measurement range:
Dissolved oxygen:0-20 mg/L
Temperature:0-40'C
Model No.: DDS-12A
Features: Conductivity Meter for lab test and analysis
Micro processor control
Power off protection
Temp.compensation
Stable operation
Model No.: HCBT-IV
Features: 1) Three-phase voltage, three-phase current, three-phase aver
2) Transformer characteristics comprehensive test desk
Model No.: RT6303B
Features: High accuracy, quality and innovation
Same function as ZERA and MTE
Competitive price
Fully technical service
Model No.: HCBT-IV
Features: 1) Three-phase voltage, three-phase current, three-phase aver
2) Transformer characteristics comprehensive test desk
Model No.: RT6303
Features: High accuracy, quality and innovation
Same function as ZERA and MTE
Competitive price
Fully technical service
Model No.: HCBT-IV
Features: 1) Transformer characteristics comprehensive test desk
2) Three-phase voltage, three-phase current, three-phase aver
Model No.: RT6303H
Features: High accuracy, quality and innovation
Same function as ZERA and MTE
Competitive price
Fully technical service
Model No.: HCTF
Features: Applicable to AC voltage withstand test of 220KV, 110KV cable.
Applicable to field AC voltage withstand test of power equipment