Product Features:
Remote Terminal Unit16 Relays output
Business Terms:
Port: Shanghai
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 100000 Piece/Pieces per Year
Payment Terms: L/C,T/T
Contact Supplier
Remote Terminal Unit16 Relays output
Port: Shanghai
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 100000 Piece/Pieces per Year
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: packed by case
Delivery Detail: within 2 weeks
1. General
The PZ-J16 Unit has 16 relay outputs which are either pulse output or the self-retain output. In the pulse type, the relay contact closes for seconds and then automatically releases. In the self-retain type, the relay output remains closed or open on a long-term basis. The unit is connected to the upper computer through an RS485 bus to perform its intended control functions.
2. Norms
| IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-5 IEC61000-4-6 EN55011 | (EN61000-4-2) (EN61000-4-3) (EN61000-4-4) (EN61000-4-5) (EN61000-4-6) | Personnel Electrostatic Discharge Immunity Testing and measurement techniques - Radiated Electrical fast transient burst immunity test Combination wave and surge impulse test Measurement Uncertainty In Immunity Test Measuring radiated emissions |
3. Technical Feature
Feature | Value | |
Output | 16 Signals | 16 relay outputs |
| Relay capacity | 5A/250vAC or 5A/30vDC | |
| Mode | pulse or self-retain | |
Power Supply | Voltage range | 24VDC (18~36VDC); AC/DC 80-270V (Order special) |
| Consumption | ≤ 5W | |
Communication | Bus Mode | 2-wires half-duplex RS485/Modbus protocol |
| Bus Capacity | ≤ 32 | |
| Response Time | 20ms | |
| Baud rate | 9600 / 4800 / 2400 / 1200 bps | |
Capacity of Sequence of Events (SOE) | ≤1600 | |
Others | Degree of Protection | IP40, Terminal IP20 |
| Isolation | 2Kv/1min,50Hz ( inputs, output and supplier) | |
| Work Temperature | -5°C - 55°C | |
| Storage Temperature | -25°C - 85°C | |
| Mounting | TS35 Standard DIN rail | |
| Dimension | 160 × 50 ×110mm | |
4.1 Size: 160 × 50 ×110mm (L*W*H)
Model No.: DZ9
Features: 1.electric meter
2.Measure voltage/current/power factor/Kwh,etc
3.With RS485 communication, 3 alarm
4.Three alarm output.
Model No.: Din rail meter
Features: 1. Electronic energy meter
2. LCD display
3.reverse indicator and stealing alarm,stealing quantity
record
4.IEC62053-21
Model No.: DDS555
Features: Single-phase static watt-hour meter is designed for measuring active energy in single-phase alternating current power grids.
Model No.: Din rail meter
Features: 1. Electronic energy meter
2. LCD display
3.reverse indicator and stealing alarm,stealing quantity
record
4.IEC62053-21
Model No.: Din rail meter
Features: 1. Electronic energy meter
2. LCD display
3.reverse indicator and stealing alarm,stealing quantity
record
4.IEC62053-21
Model No.: HA109
Features: energy smat meter
1.Keeps track and controlling of your power usage, water and gas consumption
2.OEM/ODM welcome
Model No.: DDSJ5558
Features: 1) DDSJ5558 electronic energy meter
2)High reliability
3)Good warranty
4)CE,CB,ISO9001,14001,IEC
Model No.: M021DI
Features: 1. 35mm standard DIN rail installation, comply with standard EN50022
2.Ten pole width (Modulus 12.5mm),
3. high accuracy
Model No.: DDS854
Features: It is used for measuring single phase active energy. good relibility, high accuracy, light weight and specious appearance etc.
Model No.: DTSY256
Features: 1.Three-phase Electronic Prepayment Energy Meter
2.Measure chip specially for three-phase
3.Alarm function,electricity control
Model No.: HA109 energy cost monitor
Features: energy cost monitor
1.Keeps track and controlling of your power usage, water and gas consumption
2.OEM/ODM welcome
Model No.: DDSY3333
Features: Single phase watt-hour meter adopts LSI, SMT technology and ADE7755 CMOS Chip etc. It is of high stability, accuracy, long life.