Remote control 32 analog inputs PZ-M32 - PZ-M32

1. General

PZ-M32 is applicable in intelligent systems remotely measuring analog signals, like current, voltage, power, temperature, pressure and humidity etc... PZ-M32 can accept 32 ways AC/DC 4-20mA / 0-20mA or AC/DC 0-5V analog signals. It is connected to master device or the computer by RS485 communication to transfer the data on a real-time.

It has 32 alarms LED with 3 colors to indicate the state of 32 analog inputs. We can set 2 points alarms (maximal and minimal value) as well as the delay of the alarm.

2. Technical feature
- Input 32 analog signals
Signal type 0/4-20mA AC/DC or 0-5V AC/DC
Scanning time ≤1s
- Power Supply Voltage range 24 VDC(18-36VDC) or AC/DC 80-270V
Consumption ≤ 5W
- Communication Bus Mode 2-wires half-duplex RS485/Modbus protocol
Bus Capacity ≤ 32
Response Time 20ms
Baud rate 9600 / 4800 / 2400 / 1200 bps
- Capacity of Sequence of Events (SOE) ≤1600
- Degree of Protection IP40, Terminal IP20
- Isolation 2Kv/1min,50Hz ( inputs, output and supplier)
- Work Temperature -5C - 55C
- Storage Temperature -25C - 85C
- Mounting TS35 Standard DIN rail
- Dimention 160 × 50 ×110mm
- Standards
IEC61000-4-2: 1995 Electrostatic discharge immunity test Level 3
IEC61000-4-3: 1995 Radiated, radio-frequency, Level 3 electromagnetic field immunity
IEC61000-4-4: 1995 Electrical fast transient pulse immunity test Level 3
IEC61000-4-5: 1995 Surge immunity test Level 3
EN55022: 1998 Information technology equipment(ITE) Level B

3. The description of LED for analog input alarm

PZ-M32 can indicate the states of all the analog inputs. By 2 Rs485 communications, we can set maximal and minimal values alarms as well as the delay of alarms. It has 32 LED with 3 colors to match each analog input.

Description LED:

OFF: no input

Green: work well, the analog input value is between maximal and minimal alarms.

Red: on the state of maximal value.

Orange: on the state of minimal value.