Reinforcement Rods Rader SENCION be-ta1-RR - SENCION be-ta1-RR

Detection of Reinforcement Rods
Reinforcement rods are used in buildings, bridges, and other structures to enhance their strength. However the position of these rods cannot be determined by examining the surface. The SENCI-ON is an ideal tool for detecting the location of reinforcement rods and determining whether construction has been completed to specifications. This is vital in accessing the strength of a structure in order to prevent accidents or investigate the cause of an accident that has occurred.

Recorded measurements

Recorded measurements

Analysis results

Investigation of the internal structure of concrete provides an effective means for determining its strength and the location of reinforcement rods. This analysis clearly shows the reinforcement

rods inside the concrete structure.

Sencion β1 catches the position and depth of an investigation subject using electromagnetic waves, and displays an investigation section on a monitoring screen in an instant.
It are all detectable a wide range of substances, such as underground conduits, cavities, and reinforcement rods within concrete, to mention a few.

Detection principle
The SENCI-ON uses exactly the same principles as radar employed by airplanes and marine vessels. For example,airplane radars emit radio waves in 360 degrees. Radio waves deflected by another airplane are received by the radar antenna. The time between the emission and the reception is used to calculate the distance to the second airplane. The direction of the antenna is used to determine its position in space. As the objects that the SENCI-ON detects are stationary, location and depth are determined by moving the antenna.

Electromagnetic wave signal adjustment display

Cross sectional display of the ground being surveyed

SPECIFICATIONS

Model SENCION β1

Detection Method Electromagnetic Impulse Radar

Detection Depth Roughly 1.5 m range

Resolution Pitch ±3mm

Operation Modes A•B•3D mode

Display Method Liquid Color Display, 256 colors

Power Source DC 12V Battery

Operating Environment ~40°C 95% RH

Dimensions / Weight Length 1m / 4kg

FEATURES

• Non-contact, non-destructive operation
• Lightweight and portable
• Operation by single operator
• Interchangeable antennas depending on field
• Saving and retrieving data by IC card, standard
• No need for power outlet
• 3 hours operation by portable battery
• Continuous operation by solar battery vest under sunlight
• 3D display function included

The package contains one each of th following:

1. The SENCI-ON
2. Screwdriver for adjustment use
3. Portable battery
4. Power cable
5. Timer
6. AC charger
7. IC card
8. Instruction manual

We usually about fifty stocks.

Please contuct us.