RO Controller - ROC-4313

pH Controller, Conductivity Controller, ORP controller, water quality controller, Water Quality Monitor, ph/orp controller

ROC-4313 RO Controller
Performance Features:
The instrument is combination of two stage reverse osmosis controller and on-line conductivity monitor. It is a special-purpose measurement and control system. This system has the functions of automatic test, operation test, status control, display, letter hint, indicating light display etc. The controller aggregates all the advantages of PLC controller and the meter for measuring water quality.

Main Technical Specifications:
-Reverse osmosis collecting point: Raw water tank level, middle tank level, no water protection, handle/automatic control, first stage pressurization pump low/high pressure protection, second stage pressurization pump high pressure protection, and so on.
-Collecting input signal: Direct current power supply, pull electrical digit, all terminals are isolated .
-Reverse osmosis controlling point: Feed water pump, first-grade pressurization pump, second-grade pressurization pump, inlet water valve, pretreatment valve, flushing valve, first-grade over-limit outflow valve, second-grade over-limit outflow valve.
-Measuring collection point: Raw water conductivity collect ,first-stage outlet water conductivity collect, and second-stage outlet water as well as temperature collection .
-Measuring range: Raw water conductivity 0~20mS/cm, 0~2000μS/cm (match 10cm-1 or 1.0cm-1 electrode) first-stage reverse osmosis conductivity 0~200μS/cm (match 1.0 cm-1 electrode) second-stage reverse osmosis conductivity 0~20μS/cm (match 0.1cm-1 electrode)
-Power supply voltage: 24V DC (switch should be installed outside when designing)
-Accuracy:1.5 level
-Output control mode: ON single contactor output
-Load capacity of output contact: 5A/250V AC 3A/24V DC
-Rate of renewal of connecting result: ≤1second\time
-Operation pressure of conductance cell:0~0.5Mpa
-Temperature compensation: automatic temperature with 25ºC as reference temperature
-Outline dimensions: 130×180×60mm(height ×width ×depth)
-Slot dimension for installation: 122×172mm (height× width)
-Installation: Control plate panel