Fully integrated design of the measurement unit with computer and oscillograph by adopting the latest ARM technology.
Port: Zhuhai
Minimum Order Quantity: 1 Set/Sets n/a
Supply Ability: 150 Set/Sets per Month n/a
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: seaworthy packing
Delivery Detail: 1 month after order confirmation
Resistance Particle Counter
Model:RC3000
Principle:
Resistance (Coulter) Particle Counter uses the Electrical Sensing Zone method, also called Coulter principle to measure the particle size. As shown in the figure,the aperture tube is dipped into the electrolyte. There are two electrodes separated by the aperture tube, between the electrodes flows electric current. Particles are suspended in a weak electrolyte solution while measuring, as particles pass through the aperture, they displace their own volume of electrolyte, momentarily increasing the resistance of the aperture. This change in resistance produces a pulse that is digitally processed in real time. Analyzing these pulses enables a size distribution to be acquired and displayed in volume and diameter.
Features:
1.Fully integrated design of the measurement unit with computer and oscillograph by adopting the latest ARM technology.
2.Advanced pulse peak measurement technology, more than 8000 channels.
3.Replace the traditional mercury manometer with a pressure sensor, providing more accurate measurement and controls of vacuum degrees with higher automation.
4.Proprietary photoelectric liquid level detection technology makes the volume measurement more accurate and reliable.
5.Auto de-clogging function.
6.Advanced auto electrical level balance technology minimized the influence of electrolytes.
Report Items:
Particle size distribution table & graph, Mean diameter, Median diameter, Standard deviation, Coefficient of variation, Specific surface area, Quantity of particles etc.
Laser Particle Size Analyzers Selection Guide
Models | Applications | Dispersant | Measuring Range | Features |
Easysizer20 | Powders, suspensions | Liquid | 0.1~500μm | Fully automatic, most minimized the operator factors, with very easy operation. |
LS-pop(6) | Powders, suspensions | Liquid | 0.2~500μm | Basic cost effective instrument with well developed technology |
LS-pop(8A) | Powders, suspensions | Liquid | 0.2~500μm | Basic cost effective instrument with well developed technology |
LS608 | Powders, suspensions | Liquid | 0.1~500μm | With the same measuring range as Easysizer20 |
LS908 | Powders, suspensions | Liquid | 0.05~500μm | The only effective instrument with lower limit of submicron made in China(D50<1μm) |
LS-CWM(3) | Powders, suspensions | Liquid | 0.5~1500μm | Measurement of coarse(D50>100μm) and wide distribution samples, suitable for coal slurry etc. |
LS-C(III) | Powders, suspensions | Liquid, Air | 0.1~1000μm | Measurement of samples that cannot be dispersed in liquid; wet dispersion is optional for this model. |
DP-02P | Fog drops | 1.0~1500μm | For the measurement of fog drops | |
RC-3000 | Powers Suspensions | 1.0~256μm | Suitable for high resolution samples, such as copy powder, micro-abrasives; Or for liquids with few particles such as particles in river water. | |
RC-2100 | Powers Suspensions | 1.0~256μm | ||
PIP9.1 | Powers Suspensions | 0.5~3000μm | Observe the particle images besides of particle size distributions, a good assistant instrument for particle size analysis. |
LS-POP6 EASYSIZER20