QA-107 type Amplification Transmitter - QA-107

*Linearity: 0.02~0.05%F.S;, *Sensor excitation voltage: 10VDC;, *Sensor input signal: 1~2mv/v ;, *Transmitter output - more info check here: http://www.buymeasuringtools.com/QA-107-type-Amplification-Transmitter-10039991/

Quick Brief

Place of Origin: Shaanxi China (Mainland) Brand Name: QY sensor Model Number: QA-107

Product Features:

*Linearity: 0.02~0.05%F.S;

*Sensor excitation voltage: 10VDC;

*Sensor input signal: 1~2mv/v ;

*Transmitter output

Business Terms:

Port: Xi'an

Minimum Order Quantity: 1 Piece/Pieces

Supply Ability: 1,000 Piece/Pieces per Month

Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram,ESCROW

Contact Supplier

Specifications and Product Details:

Features

1.107 Weight transmitter is designed for resistance strain sensor supporting.

Can be allocated to all kinds of weighing/strain sensors, has small size, high precision meanwhile the output signal is 0 ~ 10 V and 4 ~ 20 mA, widely used in all kinds of automatic test and control occasions;

2. linearity: 0.02~0.05%F.S;

3. sensor excitation voltage: 10VDC;

4. Sensor input signal: 1~2mv/v ;

5. Transmitter output signal: 0~10V(5V),4~20mA ;

6. Power supply: DC24V or AC220V ;

7. Profile: 190×180×80, Aluminum alloy enclosure;

8. Quantity of connection sensor: connect 3 at the same time (AC 220V); connect 4 at the same time (DC 24V)

Electrical connection

1.107 Weight transmitter internal connection of the sensor 5 terminals,connection model as below:

IN+: Sensor output signal+;

IN-: Sensor output signal-;

V+: Sensor power+;

GND-: Sensor power-;

COM: shielding port

2. 107 Weight transmitter internal 3 terminals is transmitter signal output terminal, connection model as below:

GND: Output signal ground;

IOUT: Current signal output terminal;

VOUT: Voltage signal output terminal.

3. 107 weight transmitter internal two terminals is power input, connection model as below:

+24V: The transmitter work power Dc+, have polarity protection function;

-24V: The transmitter work power Dc-.

4.The requirements of signal cable: Transmitter use plastics waterproofing stem, Cable diameter requirements 6±0.3(mm).

Product commissioning and order instructions

1. The corresponding potentiometer functional specification

W1 is capacity adjustment potentiometer.

W2 is zero adjustment potentiometer.

W4 is 20mA adjustment potentiometer.

W3 is 4mA adjustment potentiometer.

2. Adjustment methods: Connected sensor and power supply properly, Please electricity 20 minutes after the commissioning and use when small signal input. When there is no-load, adjust W2 the output voltage for 0V, In the output voltage is 0 V adjust current W3 for output is 4 mA, Loading to full range adjust W1 the output voltage for 10V, When the output voltage is 10V adjust W4 the output current for 20mA.

3. Weight transmitter’s zero range is 50% of input range.

4. Special input, output signal can be customized.

5. Please specify the sensitivity of the sensor and sensor output resistance value.

6. W5; W6; W7; W8 respectively is 1#; 2#; 3#; 4#Sensor’s signal adjust potentiometer, Used to adjust partial load error. These functions please specify whether to need when you order products.